M-Powered 7.4 Win Vista Support
       
  Compatibility     Downloads     Answerbase     Tech Docs  
Pro Tools M-Powered 7.4cs10 Update for Windows
 
Pro Tools M-Powered 7.4cs10 Update for Windows

Pro Tools M-Powered 7.4cs10 Read Me for Windows — July 29, 2009

For M-Audio Systems with Pro Tools M-Powered 7.4 Only
  • Single installer for Windows XP and Vista
  • This update requires previous installation of Pro Tools M-Powered 7.4

Who Should Use This Update?



This update contains fixes in the following areas:
  • Playback
  • File Management
  • Time Shift Plug-in
  • RTAS Processing

Plus previous fixes in the following areas:
  • Session/File Management
  • Editing
  • QuickTime Video
  • Reason Adapted
  • Importing Audio
  • DigiBase
  • Fade files
  • Automation
  • M-Audio ProFire 2626
  • M-Audio Fast Track Ultra
  • File Comments in WAV files
  • MIDI
  • Plug-ins
  • User Interface
  • RTAS processing on AMD-based computers
  • Dynamics III
  • Elastic Time
  • Using Soundminer
  • Control Surfaces

Plus Support for M-Audio Fast Track Ultra Series & ProFire 2626
  • In addition to the fixes above for M-Powered 7.4 users with all M-Audio interfaces supported with M-Powered 7.4, Pro Tools M-Powered 7.4cs3 or higher is required for M-Powered support of the M-Audio Fast Track® Ultra, Fast Track Ultra 8R, and ProFire™ 2626.

Pro Tools M-Powered 7.4cs10 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.


What's Included in Pro Tools M-Powered 7.4cs10?



Fixed: A play command in Pro Tools may not always engage playback on the first attempt (Item #114517)
  • After a play command, the Play and Stop buttons may flash, however, Pro Tools does not playback. Subsequent tries would allow playback.

Fixed: Cannot open sessions due to PolyVector error (Item #114287)
  • Certain sessions cannot be opened due to the following error: "Could not complete your request because out_of_range: Cmn_PolyVectorImpl::At"

Fixed: Audible drift when using PAL to Film TCE conversion on long audio files (Item #113490)
  • Using the Time Shift Varispeed preset (PAL to Film -4%) will result in a file that drifts over time and runs out of sync with picture.

Fixed: Cannot select the number of RTAS processors on a hyperthreading-enabled CPU (Item #114048)
  • When working with a hyperthreading-enabled processor, Pro Tools does not allow selection of the number of RTAS processors in the Playback Engine dialog.


Included from 7.4cs9:

Fixed: Converting sample rate during Save Copy In or Import Session Data adversely affects volume automation (Item #111930)
  • Saving a session copy with sample rate conversion to a rate different from the session's may result in erroneous automation ramps between breakpoints. This is mostly evident in scenarios where a static automation level had been changed over the duration of a single region.

Fixed: Problems moving multiple selected regions (Item #99538)
  • If you selected several adjacent regions, clicking on one of them to move all selected regions will only move the region you clicked on.

Fixed: Incorrect multi-track audio import from QuickTime movies (Item #102279)
  • Multi-track QuickTime movies import into Pro [More]
Downloads    
Pro Tools M-Powered 7.4cs10 for Windows Read Me (PDF)
0.09 MB
 Download
Pro Tools M-Powered 7.4cs10 Update (Windows)
52.09 MB
 Download
 
Pro Tools 7.4.x Documentation Installers for Host-based Systems
 
Pro Tools 7.4.x Documentation Installers for Host-based Systems

In order to greatly reduce the size of the Pro Tools application web installers, most documentation is available separately from the Pro Tools installers. The downloads on this page will install Pro Tools 7.4 documentation in the correct locations in your Digidesign/Documentation folder.

Please Note: the documentation installer will replace previous versions of the same documents with the 7.4 versions. If you are not on Pro Tools 7.4, you may not wish to replace your current documentation.

These documents (and more) are also available for individual download from the following Tech Docs pages for users that do not have Pro Tools 7.4 or 7.4.2 installed, or need addtional documentation that may not be included in the installers:

[Page View]
Downloads    
Pro Tools LE and M-Powered 7.4 Documentation Installer (Windows)
65.08 MB
 Download
Pro Tools LE and M-Powered 7.4.x Documentation Installer (Mac)
64.57 MB
 Download
 
Pro Tools LE & M-Powered v7.4 & 7.4.2 Optional Toolkit Installers
 
Pro Tools LE & M-Powered v7.4 & 7.4.2 Optional Toolkit Installers
iLok licenses required

The following optional software and RTAS and/or AudioSuite format plug-ins are compatible with Pro Tools LE 7.4/7.4.2 and Pro Tools M-Powered 7.4/7.4.2 (with the exception of DV Toolkit 2, which is only for Pro Tools LE systems). These plug-ins and software require previous purchase and your iLok authorization for each plug-in and software component (MP3 Option requires your MP3 Option serial authorization code or MP3 Option iLok license). Demo versions of Music Production Toolkit and DV Toolkit 2 are not available.

For information on installation with Pro Tools 8, see the following:

For other Digidesign and Digi-Distributed plug-in updates, download from the Pro Tools Plug-Ins section.

Music Production Toolkit for Pro Tools LE or Pro Tools M-Powered 7.4 or 7.4.2
Pro Tools LE 7.4 or 7.4.2; or Pro Tools M-Powered 7.4 or 7.4.2 must already be installed on your system to use the optional software installer. Installs the following:
  • Music Production Toolkit enabler file, in your Pro Tools application folder: MusicProductionToolkit.bundle (Mac) or MusicProductionToolkit.dll (Windows)
  • DINR LE (plug-in is named "Broadband Noise Reduction LE", iLok license is named "BNR LE")
  • Hybrid
  • Smack! LE
  • SoundReplacer
  • MP3 Option
TL Space Native Edition is also included in the Music Production Toolkit, but is not part of these installers, and must be downloaded separately:
The TL Space Impulse Response (IR) Library files can be installed from your TL Space CD. Both additional IRs and the core set of IRs (included with the TL Space installation CD) are available here:

DV Toolkit 2 for Pro Tools LE 7.4 or 7.4.2
Pro Tools LE 7.4 or 7.4.2 must already be installed on your system to use this optional software installer. Installs the following:
  • DV Toolkit 2 enabler file, in your Pro Tools application folder: DVToolkit2.bundle (Mac) or DVToolkit2.dll (Windows)
    • Make sure that you have removed the timecode.bundle or timecode.dll file from your Pro Tools folder.
    • These are from the original DV Toolkit, and will not work with Pro Tools LE 7.4 or 7.4.2.
  • DigiTranslator enabler file, in your Pro Tools application folder: OMF.bundle (Mac) or OMF.dll (Windows)
  • DINR LE (plug-in is named "Broadband Noise Reduction LE", iLok license is named "BNR LE")
  • Synchro Arts VocALign Project LE (plug-in is named "VocALignLE", iLok license is named "VocALign Project LE")
  • MP3 Option
TL Space Native Edition is also included in the DV Toolkit 2, but is not part of this installer, and must be downloaded separately:
The TL Space Impulse Response (IR) Library files can be installed from your TL Space CD. Both additional IRs and the core set of IRs (included with the TL Space installation CD) are [More]
Downloads    
DV Toolkit 2 Guide v7.3 (PDF)
1.29 MB
 Download
Music Production Toolkit Guide v7.3 (PDF)
0.22 MB
 Download
DV Toolkit 2 v7.4 (Windows XP - Vista) for Pro Tools 7.4 or 8.0
23.9 MB
 Download
Music Production Toolkit v7.4 (Mac OS X Tiger) for Pro Tools 7.4
60.5 MB
 Download
Music Production Toolkit v7.4 (Windows XP - Vista) for Pro Tools 7.4 or 8.0
43.71 MB
 Download
DV Toolkit 2 v7.4 (Mac OS X Tiger) for Pro Tools 7.4
29.8 MB
 Download
Music Production Toolkit v7.4.2 (Mac OS X Leopard) for Pro Tools 7.4.2 or 8.0
59.58 MB
 Download
DV Toolkit 2 v7.4.2 (Mac OS X Leopard) for Pro Tools 7.4.2 or 8.0
28.39 MB
 Download
 
Pro Tools M-Powered 7.4cs9 Update for Windows
 
Pro Tools M-Powered 7.4cs9 Update for Windows

March 31, 2009 — Read Me Document (Included with Download)

For M-Audio Systems with Pro Tools M-Powered 7.4 Only
  • Single installer for Windows XP and Vista
  • This update requires previous installation of Pro Tools M-Powered 7.4

Who Should Use This Update?



This update contains fixes in the following areas:
  • Session/File Management
  • Editing
  • QuickTime Video

Plus previous fixes in the following areas:
  • Reason Adapted
  • Importing Audio
  • DigiBase
  • Fade files
  • Automation
  • M-Audio ProFire 2626
  • M-Audio Fast Track Ultra
  • File Comments in WAV files
  • MIDI
  • Plug-ins
  • User Interface
  • RTAS processing on AMD-based computers
  • Dynamics III
  • Elastic Time
  • Using Soundminer
  • Control Surfaces

Plus Support for M-Audio Fast Track Ultra Series & ProFire 2626
  • In addition to the fixes above for M-Powered 7.4 users with all M-Audio interfaces supported with M-Powered 7.4, Pro Tools M-Powered 7.4cs3 or higher is required for M-Powered support of the M-Audio Fast Track® Ultra, Fast Track Ultra 8R, and ProFire™ 2626.

Pro Tools M-Powered 7.4cs9 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.


What's Included in Pro Tools M-Powered 7.4cs9?



Fixed: Converting sample rate during Save Copy In or Import Session Data adversely affects volume automation (Item #111930)
  • Saving a session copy with sample rate conversion to a rate different from the session's may result in erroneous automation ramps between breakpoints. This is mostly evident in scenarios where a static automation level had been changed over the duration of a single region.

Fixed: Problems moving multiple selected regions (Item #99538)
  • If you selected several adjacent regions, clicking on one of them to move all selected regions will only move the region you clicked on.

Fixed: Incorrect multi-track audio import from QuickTime movies (Item #102279)
  • Multi-track QuickTime movies import into Pro Tools 7.4 with each audio track containing a mix of all tracks, rather than individual tracks.


Included from 7.4cs8:

Fixed: Pro Tools and Reason Crash When Loading "Machine" Patches on Reason Adapted Combinator (Item #106627)
  • Only occurs in Reason Adapted, and does not occur when Reason Adapted is operated without Pro Tools

Fixed: When Importing More than 100 Audio Files, Pro Tools could Close with no Warning (Item #100595)
  • This would occur when importing all of the files at the same time


Included from 7.4cs7:

Fixed: Attempting to Drag and Drop Files Containing iXML metadata from the Workspace Browser Would Result in No Import, and Assertion Errors (Item #100723)
  • The assertion errors would occur when attempting to subsequently save the session
  • Previous workaround was to use File > Import > Audio instead of drag and drop from the Workspace

Fixed: Despite Changing the Fade Shapes in the Fade Dialog, Fade-ins and Fade-outs Always Conformed to the Last Created Fade In and Out (Item #100913)

Fixed: Volume Breakpoints [More]
Downloads    
Pro Tools M-Powered 7.4cs9 for Windows Read Me (PDF)
0.08 MB
 Download
Pro Tools M-Powered 7.4cs9 Update (Windows)
48.96 MB
 Download
 
Pro Tools M-Powered 7.4cs8 Update for Windows
 
Pro Tools M-Powered 7.4cs8 Update for Windows

November 12, 2008 — Read Me Document (Included with Download)

Please Note: The Pro Tools M-Powered application will be version 7.4cs7 after applying the 7.4cs8 update. While other components may be updated to v7.4cs8, the actual Pro Tools application included in this update is v7.4cs7.

For M-Audio Systems with Pro Tools M-Powered 7.4 Only
  • Single installer for Windows XP and Vista
  • This update requires previous installation of Pro Tools M-Powered 7.4

Who Should Use This Update?



This update contains fixes in the following areas:
  • Reason Adapted
  • Importing Audio
Plus previous fixes in the following areas:
  • DigiBase
  • Fade files
  • Automation
  • M-Audio ProFire 2626
  • M-Audio Fast Track Ultra
  • File Comments in WAV files
  • MIDI
  • Plug-ins
  • User Interface
  • RTAS processing on AMD-based computers
  • Dynamics III
  • Elastic Time
  • Using Soundminer
  • Control Surfaces

Pro Tools M-Powered 7.4cs8 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.

M-Audio ProFire 2626 & Fast Track Ultra


In addition to the fixes above for M-Powered 7.4 users with all M-Audio interfaces, Pro Tools M-Powered 7.4cs3 or higher is required for M-Powered support of the M-Audio Fast Track Ultra and ProFire 2626.

March 27, 2008 — ProFire 2626 Now Supported
The M-Audio ProFire™ 2626 audio/MIDI interface is now officially qualified with Pro Tools M-Powered 7.4cs3 and higher for Mac OS X "Tiger", Windows XP, and Windows Vista (as well as Pro Tools M-Powered 7.4.2 for Mac OS X "Leopard"). For a list of known issues and workarounds, see this Answerbase article:

March 14, 2008 — Fast Track Ultra Now Supported
The M-Audio Fast Track® Ultra 8 x 8 audio/MIDI interface is now officially qualified with Pro Tools M-Powered 7.4cs3 and higher for Mac OS X "Tiger", Windows XP, and Windows Vista (as well as Pro Tools M-Powered 7.4.2 for Mac OS X "Leopard"). For a list of known issues and workarounds, see this Answerbase article:

What's Included in Pro Tools M-Powered 7.4cs8?



Fixed: Pro Tools and Reason Crash When Loading "Machine" Patches on Reason Adapted Combinator (Item #106627)
  • Only occurs in Reason Adapted, and does not occur when Reason Adapted is operated without Pro Tools

Fixed: When Importing More than 100 Audio Files, Pro Tools could Close with no Warning (Item #100595)
  • This would occur when importing all of the files at the same time

Fixes Included from Pro Tools M-Powered 7.4cs7



Fixed: Attempting to Drag and Drop Files Containing iXML metadata from the Workspace Browser Would Result in No Import, and Assertion Errors (Item #100723)
  • The assertion errors would occur [More]
Downloads    
Pro Tools M-Powered 7.4cs8 Update (Windows XP - Vista)
45.34 MB
 Download
Pro Tools M-Powered 7.4cs8 Read Me for Windows (PDF)
0.13 MB
 Download
 
Pro Tools M-Powered 7.4cs7 Update for Windows
 
Pro Tools M-Powered 7.4cs7 Update for Windows

August 29, 2008 — Read Me Document (Included with Download)

For M-Audio Systems with Pro Tools M-Powered 7.4 Only
  • Single installer for Windows XP and Vista
  • This update requires previous installation of Pro Tools M-Powered 7.4

Who Should Use Pro Tools M-Powered 7.4cs7?



Pro Tools M-Powered 7.4cs7 for Windows contains fixes in the following areas:
  • DigiBase
  • Fade files
  • Automation
Plus previous fixes in the following areas:
  • M-Audio ProFire 2626
  • M-Audio Fast Track Ultra
  • File Comments in WAV files
  • MIDI
  • Plug-ins
  • User Interface
  • RTAS processing on AMD-based computers
  • Dynamics III
  • Elastic Time
  • Using Soundminer
  • Control Surfaces

Pro Tools M-Powered 7.4cs7 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.

M-Audio ProFire 2626 & Fast Track Ultra


In addition to the fixes above for M-Powered 7.4 users with all M-Audio interfaces, Pro Tools M-Powered 7.4cs3 or higher is required for M-Powered support of the M-Audio Fast Track Ultra and ProFire 2626.

March 27, 2008 — ProFire 2626 Now Supported
The M-Audio ProFire™ 2626 audio/MIDI interface is now officially qualified with Pro Tools M-Powered 7.4cs3 and higher for Mac OS X "Tiger", Windows XP, and Windows Vista (as well as Pro Tools M-Powered 7.4.2 for Mac OS X "Leopard"). For a list of known issues and workarounds, see this Answerbase article:

March 14, 2008 — Fast Track Ultra Now Supported
The M-Audio Fast Track® Ultra 8 x 8 audio/MIDI interface is now officially qualified with Pro Tools M-Powered 7.4cs3 and higher for Mac OS X "Tiger", Windows XP, and Windows Vista (as well as Pro Tools M-Powered 7.4.2 for Mac OS X "Leopard"). For a list of known issues and workarounds, see this Answerbase article:

What's Included in Pro Tools M-Powered 7.4cs7?



Fixed: Attempting to Drag and Drop Files Containing iXML metadata from the Workspace Browser Would Result in No Import, and Assertion Errors (Item #100723)
  • The assertion errors would occur when attempting to subsequently save the session
  • Previous workaround was to use File > Import > Audio instead of drag and drop from the Workspace

Fixed: Despite Changing the Fade Shapes in the Fade Dialog, Fade-ins and Fade-outs Always Conformed to the Last Created Fade In and Out (Item #100913)

Fixed: Volume Breakpoints at "- inf" Could Change to Full Volume When Manually Trimming Automation (Item #104551)
  • This could occur when trying to trim the breakpoints down a few dB.

Note: There was no Pro Tools M-Powered 7.4cs6 release

Fixes Included from Pro Tools M-Powered 7.4cs5



Fixed: Cannot Launch Pro Tools M-Powered with M-Audio ProFire 2626 or Fast Track Ultra [More]
Downloads    
Pro Tools M-Powered 7.4cs7 Read Me for Windows (PDF)
0.08 MB
 Download
Pro Tools M-Powered 7.4cs7 Update (Windows XP - Vista)
45.13 MB
 Download
 
Pro Tools M-Powered 7.4cs5 Update for Windows
 
Pro Tools M-Powered 7.4cs5 Update for Windows

June 3, 2008 — Read Me Document (Included with Download)

For M-Audio Systems with Pro Tools M-Powered 7.4 Only
  • Single installer for Windows XP and Vista
  • This update requires previous installation of Pro Tools M-Powered 7.4

Who Should Use Pro Tools M-Powered 7.4cs5?



Pro Tools M-Powered 7.4cs5 for Windows contains fixes in the following areas:
  • M-Audio ProFire 2626
  • M-Audio Fast Track Ultra
Plus previous fixes in the following areas:
  • DigiBase
  • File Comments in WAV files
  • MIDI
  • Automation
  • Plug-ins
  • User Interface
  • RTAS processing on AMD-based computers
  • Dynamics III
  • Elastic Time
  • Using Soundminer
  • Control Surfaces
Pro Tools M-Powered 7.4cs5 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.

M-Audio ProFire 2626 & Fast Track Ultra


In addition to the fixes above for M-Powered 7.4 users with all M-Audio interfaces, Pro Tools M-Powered 7.4cs3 or higher is required for M-Powered support of the M-Audio Fast Track Ultra and ProFire 2626.

March 27, 2008 — ProFire 2626 Now Supported
The M-Audio ProFire™ 2626 audio/MIDI interface is now officially qualified with Pro Tools M-Powered 7.4cs3 and higher for Mac OS X "Tiger", Windows XP, and Windows Vista. For a list of known issues and workarounds, see this Answerbase article:

March 14, 2008 — Fast Track Ultra Now Supported
The M-Audio Fast Track® Ultra 8 x 8 audio/MIDI interface is now officially qualified with Pro Tools M-Powered 7.4cs3 and higher for Mac OS X "Tiger", Windows XP, and Windows Vista. For a list of known issues and workarounds, see this Answerbase article:

What's Fixed in Pro Tools M-Powered 7.4cs5?



Fixed: Cannot Launch Pro Tools M-Powered with M-Audio ProFire 2626 or Fast Track Ultra on Non-English Windows Vista or Windows XP OS (Item #103928)
  • Attempting to launch would result in a "0 Length String" error message

Fixes Included from Pro Tools M-Powered 7.4cs4



Fixed: The following error is generated when selecting a 256 + comment in the Workspace: "The value contained too many characters; previous value substituted". (Item# 100604)

Fixed: WAV File Metadata Containing Non-English Characters Are Not Visible In Pro Tools 7.4, and Comments Can Be Lost if Edited (Item #100502)
  • Although the file comments are invisible in the DigiBase comments field, clicking in that field will delete all of the comments
  • This only affects non-BWF WAV files
  • This CS version restores the visibility of WAV file comments, as long as the field wasn't clicked in using earlier versions of Pro Tools 7.4
Fixed: Only the First 16 MIDI Inputs Are Available In The MIDI Input Enable Window (Item #76712)
Downloads    
Pro Tools M-Powered 7.4cs5 Read Me for Windows (PDF)
0.09 MB
 Download
Pro Tools M-Powered 7.4cs5 Update (Windows XP - Vista)
45.09 MB
 Download
 
Pro Tools M-Powered 7.4cs4 Update for Windows
 
Pro Tools M-Powered 7.4cs4 Update for Windows

April 23, 2008 — Read Me Document (Included with Download)

For M-Audio Systems with Pro Tools M-Powered 7.4 Only
  • Single installer for Windows XP and Vista
  • This update requires previous installation of Pro Tools M-Powered 7.4

Who Should Use Pro Tools M-Powered 7.4cs4?



Pro Tools M-Powered 7.4cs4 for Windows contains fixes in the following areas:
  • DigiBase
  • File Comments in WAV files
  • MIDI
Plus previous fixes in the following areas:
  • Automation
  • Plug-ins
  • User Interface
  • RTAS processing on AMD-based computers
  • Dynamics III
  • Elastic Time
  • Using Soundminer
  • MIDI
  • Control Surfaces
Pro Tools M-Powered 7.4cs4 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.

M-Audio ProFire 2626 & Fast Track Ultra


In addition to the fixes above for M-Powered 7.4 users with all M-Audio interfaces, Pro Tools M-Powered 7.4cs3 or higher is required for M-Powered support of the M-Audio Fast Track Ultra and ProFire 2626.

March 27, 2008 — ProFire 2626 Now Supported
The M-Audio ProFire™ 2626 audio/MIDI interface is now officially qualified with Pro Tools M-Powered 7.4cs3 and higher for Mac OS X "Tiger", Windows XP, and Windows Vista. For a list of known issues and workarounds, see this Answerbase article:

March 14, 2008 — Fast Track Ultra Now Supported
The M-Audio Fast Track® Ultra 8 x 8 audio/MIDI interface is now officially qualified with Pro Tools M-Powered 7.4cs3 and higher for Mac OS X "Tiger", Windows XP, and Windows Vista. For a list of known issues and workarounds, see this Answerbase article:

What's Fixed in Pro Tools M-Powered 7.4cs4?



Fixed: The following error is generated when selecting a 256 + comment in the Workspace: "The value contained too many characters; previous value substituted". (Item# 100604)

Fixed: WAV File Metadata Containing Non-English Characters Are Not Visible In Pro Tools 7.4, and Comments Can Be Lost if Edited (Item #100502)
  • Although the file comments are invisible in the DigiBase comments field, clicking in that field will delete all of the comments
  • This only affects non-BWF WAV files
  • This CS version restores the visibility of WAV file comments, as long as the field wasn't clicked in using earlier versions of Pro Tools 7.4
Fixed: Only the First 16 MIDI Inputs Are Available In The MIDI Input Enable Window (Item #76712)
  • Window cannot be resized, scroll bar doesn't access other MIDI inputs

Fixes Included from Pro Tools M-Powered 7.4cs3



Fixed: Pro Tools Automation Thinning Could Sometimes Remove Non-Redundant Breakpoints (Item #100794)
  • The thinning algorithm could mistakenly classify a breakpoint as redundant
Fixed: Certain Third [More]
Downloads    
Pro Tools M-Powered 7.4cs4 Update (Windows XP - Vista)
43.67 MB
 Download
Pro Tools M-Powered 7.4cs4 Read Me for Windows (PDF)
0.09 MB
 Download
 
Pro Tools M-Powered 7.4cs3 Update for Windows
 
Pro Tools M-Powered 7.4cs3 Update for Windows

Release Date — February 29, 2008

March 27, 2008 — ProFire 2626 Now Supported


The M-Audio ProFire™ 2626 audio/MIDI interface is now officially qualified with Pro Tools M-Powered 7.4cs3 and higher for Mac OS X "Tiger", Windows XP, and Windows Vista.

For a list of known issues and workarounds with the ProFire 2626 and Pro Tools M-Powered 7.4cs3, see this Answerbase article:
M-Audio ProFire 2626 & Pro Tools M-Powered

March 14, 2008 — Fast Track Ultra Now Supported


The M-Audio Fast Track® Ultra 8 x 8 audio/MIDI interface is now officially qualified with Pro Tools M-Powered 7.4cs3 and higher.

For a list of known issues and workarounds with the Fast Track Ultra and Pro Tools M-Powered 7.4cs3, see this Answerbase article:
M-Audio Fast Track Ultra & Pro Tools M-Powered

Pro Tools M-Powered 7.4cs3 or higher is required for M-Powered support of the M-Audio Fast Track Ultra and ProFire 2626.

Please Note: If you have previously installed 7.4cs3, there is no need to download 7.4cs3 again. Software components required to use the Fast Track Ultra and ProFire 2626 with Pro Tools M-Powered were already included in the Pro Tools M-Powered 7.4cs3 release posted on February 29, 2008. The original Pro Tools M-Powered 7.4cs3 software installer has not changed.

Read Me document included with download:

Who Should Use Pro Tools M-Powered 7.4cs3?



For M-Audio Systems with Pro Tools M-Powered 7.4 Only
  • Single installer for Windows XP and Vista
  • This update requires previous installation of Pro Tools M-Powered 7.4

Pro Tools M-Powered 7.4cs3 for Windows contains fixes in the following areas for all M-Audio devices with Pro Tools M-Powered 7.4 software:
  • Automation
  • Plug-ins
Plus previous fixes in the following areas:
  • User Interface
  • RTAS processing on AMD-based computers
  • Dynamics III
  • Elastic Time
  • Using Soundminer
  • MIDI
  • Control Surfaces
Pro Tools M-Powered 7.4cs3 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.

What's Fixed in Pro Tools M-Powered 7.4cs3?



Fixed: Pro Tools Automation Thinning Could Sometimes Remove Non-Redundant Breakpoints (Item #100794)
  • The thinning algorithm could mistakenly classify a breakpoint as redundant
Fixed: Certain Third Party Products Could Cause Pro Tools to crash (Item #100661)
  • Celemony Melodyne and AudioEase Snapper would cause a crash with tick-based regions (introduced in Pro Tools 7.4)

Fixes Included from Pro Tools M-Powered 7.4cs2



Fixed: Track Color Coding Saturation Was Not Adjustable (Item #94474)
  • Functionality is now the same as in Pro Tools 7.3.x
Fixed: RTAS Processor Selection in Playback Engine Dialog Was Greyed Out With Multi-Processor AMD-based Computers (Item #99545)
  • Note that this condition should only [More]
Downloads    
Pro Tools M-Powered 7.4cs3 Read Me for Windows (PDF)
0.08 MB
 Download
Pro Tools M-Powered 7.4cs3 Update (Windows XP - Vista)
42.66 MB
 Download
M-Audio Fast Track Ultra & Pro Tools M-Powered 7.4cs3 (PDF)
0.07 MB
 Download
M-Audio ProFire 2626 & Pro Tools M-Powered 7.4cs3 (PDF)
0.07 MB
 Download
 
Pro Tools M-Powered 7.4cs2 Update for Windows
 
Pro Tools M-Powered 7.4cs2 Update for Windows

December 20, 2007 — Read Me Document (Included with Download)

For M-Audio Systems with Pro Tools M-Powered 7.4 Only
  • Single installer for Windows XP and Vista
  • This update requires previous installation of Pro Tools M-Powered 7.4

Who Should Use Pro Tools M-Powered 7.4cs2?



Pro Tools M-Powered 7.4cs2 contains fixes in the following areas:
  • User Interface
  • RTAS processing on AMD-based computers
  • Dynamics III
  • Elastic Time
  • Using Soundminer
  • MIDI
  • Control Surfaces
Pro Tools M-Powered 7.4cs2 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.

What's Fixed in Pro Tools M-Powered 7.4cs2?



Fixed: Track Color Coding Saturation Was Not Adjustable (Item #94474)
  • Functionality is now the same as in Pro Tools 7.3.x
Fixed: RTAS Processor Selection in Playback Engine Dialog Was Greyed Out With Multi-Processor AMD-based Computers (Item #99545)
  • Note that this condition should only occur when HyperThreading is enabled on Intel-based computers
Fixed: Opening a Session with an RTAS Version of Dynamics III Could Result in a Burst of Noise (Item #99562)
  • This problem was intermittent
Fixed: Quantizing Grouped Elastic Audio Tracks Produces Some Inaccurate Transient Placement (Item #100013)
  • Transients could be placed either before or after grid lines
Fixed: User Can Only Promote the Confidence of an Event Marker by Moving it (Item #100378)
  • Clicking on any Event marker will now raise its internal confidence rating to 100%, thus preventing the marker from being removed when the Event Sensitivity setting is lowered within the Elastic Properties window
Fixed: Using Render or Commit With "Rhythmic" Algorithm Can Produce Artifacts at End of Files (Item #100420)
  • This would usually occur when using extreme amounts of stretching
Fixed: Elastic Time Warp Markers Could Move After Quantizing (Item #100423)
  • Quantizing a selected area could cause markers outside that selection to move
Fixed: Errors Resulting From Importing Certain Files Using Soundminer (Item #100028)
  • File names using an ellipsis (...) would cause the error, "Unable to create a new audio file on drive "xxx" for track "xxx" because I/O error (-36)."
Fixed: Pro Tools May Crash While Setting Up MIDI When Administrator Account Name Contains a Non-English OS and/or a Non-ASCII Character (Item #100142)
  • Known to have occurred with Norwegian, Czech, Japanese and Korean Operating Systems

Fixes Included from Pro Tools M-Powered 7.4cs1



Fixed: Pro Tools quits unexpectedly when moving a plug-in window while closing it from a control surface (Item #99442)
  • If a plug-in window was closed from a control surface while the plug-in window was being dragged across the screen, Pro Tools would quit unexpectedly.

Installation Instructions



To update to Pro Tools M-Powered 7.4cs2:

1. Verify Pro Tools M-Powered 7.4 is installed on your system.
2. Quit the Pro Tools application if it is open.
3. Locate the Pro [More]
Downloads    
Pro Tools M-Powered 7.4cs2 Update (Windows XP - Vista)
42.23 MB
 Download
Pro Tools M-Powered 7.4cs2 Read Me for Windows
0.08 MB
 Download
 

 
Support Search
Search
  Next