DV Toolkit 2 Support
Product Info
       
  Compatibility     Downloads     Answerbase     Tech Docs  
Pro Tools LE 7.4cs10 Update for Windows
 
Pro Tools LE 7.4cs10 Update for Windows

Pro Tools LE 7.4cs10 Read Me for Windows — July 29, 2009

For 003 Factory, 003 Rack, 003 Rack+, Digi 002, Digi 002 Rack, Mbox 2 Pro, Mbox 2, Mbox 2 Mini, Mbox 2 Micro, and Mbox Systems with Pro Tools LE 7.4 Only
  • Single installer for Windows XP and Vista
  • This update requires previous installation of Pro Tools LE 7.4

Who Should Use This Update?



This update contains fixes in the following areas:
  • Playback
  • File Management
  • Time Shift Plug-in
  • RTAS Processing
  • VENUE FWx

Plus previous fixes and changes in the following areas:
  • Session/File Management
  • Editing
  • QuickTime Video
  • Recording
  • Reason Adapted
  • Importing Audio
  • DigiBase
  • Fade files
  • Automation
  • Modification: Expand to New Tracks by Time Code Only
    • Requires DV Toolkit 2
  • File Comments in WAV files
  • MIDI
  • 003
  • Plug-ins
  • PAL/Mojo
  • User Interface
  • RTAS processing on AMD-based computers
  • Dynamics III
  • Elastic Time
  • Using Soundminer
  • Avid Video Peripherals (Windows XP)
  • Digidesign Control Surfaces:
    • Command|8
    • C|24
    • Control|24
    • 003 Factory (console)
    • Digi 002 (console)

Pro Tools LE 7.4cs10 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.


What’s Included in Pro Tools LE 7.4cs10 for Windows?



Fixed: A play command in Pro Tools may not always engage playback on the first attempt (Item #114517)
  • After a play command, the Play and Stop buttons may flash, however, Pro Tools does not playback. Subsequent tries would allow playback.

Fixed: Cannot open sessions due to PolyVector error (Item #114287)
  • Certain sessions cannot be opened due to the following error: "Could not complete your request because out_of_range: Cmn_PolyVectorImpl::At"

Fixed: Audible drift when using PAL to Film TCE conversion on long audio files (Item #113490)
  • Using the Time Shift Varispeed preset (PAL to Film -4%) will result in a file that drifts over time and runs out of sync with picture.

Fixed: Cannot select the number of RTAS processors on a hyperthreading-enabled CPU (Item #114048)
  • When working with a hyperthreading-enabled processor, Pro Tools does not allow selection of the number of RTAS processors in the Playback Engine dialog.

Fixed: Pro Tools LE does not launch when connected to a VENUE system via FWx card (Item #113126)
  • Pro Tools LE would hang on "DAE Loaded" while launching when connected via FWx card.


Included from 7.4cs9:

Fixed: Converting sample rate during Save Copy In or Import Session Data adversely affects volume automation (Item #111930)
  • Saving a session copy with sample rate conversion to a rate different from the session's may result in erroneous automation ramps between breakpoints. This is mostly evident in scenarios where a static automation level had been changed over the duration of a single region.

Fixed: Problems moving multiple selected regions (Item #99538)
  • If you selected several adjacent regions, clicking on one of them to move all selected regions will only move [More]
Downloads    
Expand to New Tracks by Time Code Only Read Me (PDF)
0.03 MB
 Download
Pro Tools LE 7.4cs10 for Windows Read Me (PDF)
0.09 MB
 Download
Pro Tools LE 7.4cs10 Update (Windows)
54.5 MB
 Download
 
Pro Tools LE 7.4.2cs4 Update for Mac OS X (Leopard)
 
Pro Tools LE 7.4.2cs4 Update for Mac OS X (Leopard)

Pro Tools LE 7.4.2cs4 Read Me for Mac OS X — July 29, 2009

For 003 Factory, 003 Rack, 003 Rack+, Digi 002, Digi 002 Rack, Mbox 2 Pro, Mbox 2, Mbox 2 Mini, Mbox 2 Micro, and Mbox Systems with Pro Tools LE 7.4.2 for Mac OS X "Leopard" Only
  • Universal installer for PowerPC and Intel-based Macs on Mac OS X 10.5.3 and 10.5.4
  • This update requires previous installation of Pro Tools LE 7.4.2:

Who Should Use This Update?



This update contains fixes in the following areas:
  • Playback
  • File Management
  • Time Shift Plug-in
  • Core Audio
  • Using original Mbox on Intel-based Macs

Plus previous fixes and changes in the following areas:
  • Session/File Management
  • Editing
  • QuickTime Video
  • Automation
  • Reason Adapted
  • Recording
  • Modification: Expand to New Tracks by Time Code Only
    • Requires DV Toolkit 2
  • DigiBase
  • Fade files
  • File Comments in WAV files
  • MIDI
  • Avid Mojo/Mojo SDI

Pro Tools LE 7.4.2cs4 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.


What’s Included in Pro Tools LE 7.4.2cs4 for Mac OS X?



Fixed: A play command in Pro Tools may not always engage playback on the first attempt (Item #114517)
  • After a play command, the Play and Stop buttons may flash, however, Pro Tools does not playback. Subsequent tries would allow playback.

Fixed: Cannot open sessions due to PolyVector error (Item #114287)
  • Certain sessions cannot be opened due to the following error: "Could not complete your request because out_of_range: Cmn_PolyVectorImpl::At"

Fixed: Audible drift when using PAL to Film TCE conversion on long audio files (Item #113490)
  • Using the Time Shift Varispeed preset (PAL to Film -4%) will result in a file that drifts over time and runs out of sync with picture.

Fixed: OS X may become unresponsive while using Core Audio applications with Mbox 2 USB interfaces (Item #100422)
  • The operating system becomes unresponsive (spinning beach ball, freeze, or “kernel panic” message), requiring a restart of the computer.
Please Note: Connecting or disconnecting an interface while the computer is turned on (hot swapping) can also cause problems with the operating system, such as "You need to restart your computer" (kernel panic) messages. This is a separate issue unrelated to the fix listed above. Hot swapping is not recommended with any audio interface, particularly when that interface is being used by an application.

Fixed: With Original Mbox on Intel-Based Macs, DAE Error -9136 Could Occur During Playback (Item #83438)
  • This problem does not occur on any Mbox 2 products or PowerPC-based Macs
  • Please note that for Intel-based macs only, this fix will add approximately 3ms of monitoring latency when performing with virtual instruments
  • This fix eliminates many, but not all instances of error -9136 during playback with the original Mbox on Intel-based Macs. For other possible causes of -9136 errors, see the following [More]
Downloads    
Expand to New Tracks by Time Code Only Read Me (PDF)
0.03 MB
 Download
Pro Tools LE 7.4.2cs4 Read Me (PDF)
0.08 MB
 Download
Pro Tools LE 7.4.2cs4 Update (Mac OS X Leopard)
106.87 MB
 Download
 
Pro Tools LE 7.4cs10 Update for Mac OS X (Tiger)
 
Pro Tools LE 7.4cs10 Update for Mac OS X (Tiger)

Pro Tools LE 7.4cs10 Read Me for Mac OS X — July 29, 2009

For 003 Factory, 003 Rack, 003 Rack+, Digi 002, Digi 002 Rack, Mbox 2 Pro, Mbox 2, Mbox 2 Mini, Mbox 2 Micro, and Mbox Systems with Pro Tools LE 7.4 Only
  • Universal installer for PowerPC and Intel-based Macs on Mac OS X 10.4 ("Tiger")
  • Not supported on Mac OS X 10.5 ("Leopard")
  • This update requires previous installation of Pro Tools LE 7.4

Who Should Use This Update?



This update contains fixes in the following areas:
  • Playback
  • File Management
  • Time Shift Plug-in
  • Core Audio
  • Using original Mbox on Intel-based Macs

Plus previous fixes and changes in the following areas:
  • Session/File Management
  • Editing
  • QuickTime Video
  • Recording
  • Reason Adapted
  • DigiBase
  • Fade files
  • Automation
  • Modification: Expand to New Tracks by Time Code Only
    • Requires DV Toolkit 2
  • File Comments in WAV files
  • MIDI
  • Avid Video
  • 003
  • Plug-ins
  • PAL/Mojo
  • Scrubbing with Mojo
  • User Interface
  • Dynamics III
  • Using Soundminer
  • Avid Video Peripherals
  • Elastic Time
  • Digidesign Control Surfaces:
    • Command|8
    • C|24
    • Control|24
    • 003 Factory (console)
    • Digi 002 (console)

Pro Tools LE 7.4cs10 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.


What’s Included in Pro Tools LE 7.4cs10 for Mac OS X?



Fixed: A play command in Pro Tools may not always engage playback on the first attempt (Item #114517)
  • After a play command, the Play and Stop buttons may flash, however, Pro Tools does not playback. Subsequent tries would allow playback.

Fixed: Cannot open sessions due to PolyVector error (Item #114287)
  • Certain sessions cannot be opened due to the following error: "Could not complete your request because out_of_range: Cmn_PolyVectorImpl::At"

Fixed: Audible drift when using PAL to Film TCE conversion on long audio files (Item #113490)
  • Using the Time Shift Varispeed preset (PAL to Film -4%) will result in a file that drifts over time and runs out of sync with picture.

Fixed: OS X may become unresponsive while using Core Audio applications with Mbox 2 USB interfaces (Item #100422)
  • The operating system becomes unresponsive (spinning beach ball, freeze, or “kernel panic” message), requiring a restart of the computer.
Please Note: Connecting or disconnecting an interface while the computer is turned on (hot swapping) can also cause problems with the operating system, such as "You need to restart your computer" (kernel panic) messages. This is a separate issue unrelated to the fix listed above. Hot swapping is not recommended with any audio interface, particularly when that interface is being used by an application.

Fixed: With Original Mbox on Intel-Based Macs, DAE Error -9136 Could Occur During Playback (Item #83438)
  • This problem does not occur on any Mbox 2 products or PowerPC-based Macs
  • Please note that for Intel-based macs only, this fix will add approximately 3ms of monitoring latency when performing with virtual instruments
  • This fix eliminates many, but not [More]
Downloads    
Expand to New Tracks by Time Code Only Read Me (PDF)
0.03 MB
 Download
Pro Tools LE 7.4cs10 for Mac Read Me (PDF)
0.09 MB
 Download
Pro Tools LE 7.4cs10 Update (Mac OS X Tiger)
111.48 MB
 Download
 
Pro Tools LE & M-Powered v7.4 & 7.4.2 Optional Toolkit Installers
 
Pro Tools LE & M-Powered v7.4 & 7.4.2 Optional Toolkit Installers
iLok licenses required

The following optional software and RTAS and/or AudioSuite format plug-ins are compatible with Pro Tools LE 7.4/7.4.2 and Pro Tools M-Powered 7.4/7.4.2 (with the exception of DV Toolkit 2, which is only for Pro Tools LE systems). These plug-ins and software require previous purchase and your iLok authorization for each plug-in and software component (MP3 Option requires your MP3 Option serial authorization code or MP3 Option iLok license). Demo versions of Music Production Toolkit and DV Toolkit 2 are not available.

For information on installation with Pro Tools 8, see the following:

For other Digidesign and Digi-Distributed plug-in updates, download from the Pro Tools Plug-Ins section.

Music Production Toolkit for Pro Tools LE or Pro Tools M-Powered 7.4 or 7.4.2
Pro Tools LE 7.4 or 7.4.2; or Pro Tools M-Powered 7.4 or 7.4.2 must already be installed on your system to use the optional software installer. Installs the following:
  • Music Production Toolkit enabler file, in your Pro Tools application folder: MusicProductionToolkit.bundle (Mac) or MusicProductionToolkit.dll (Windows)
  • DINR LE (plug-in is named "Broadband Noise Reduction LE", iLok license is named "BNR LE")
  • Hybrid
  • Smack! LE
  • SoundReplacer
  • MP3 Option
TL Space Native Edition is also included in the Music Production Toolkit, but is not part of these installers, and must be downloaded separately:
The TL Space Impulse Response (IR) Library files can be installed from your TL Space CD. Both additional IRs and the core set of IRs (included with the TL Space installation CD) are available here:

DV Toolkit 2 for Pro Tools LE 7.4 or 7.4.2
Pro Tools LE 7.4 or 7.4.2 must already be installed on your system to use this optional software installer. Installs the following:
  • DV Toolkit 2 enabler file, in your Pro Tools application folder: DVToolkit2.bundle (Mac) or DVToolkit2.dll (Windows)
    • Make sure that you have removed the timecode.bundle or timecode.dll file from your Pro Tools folder.
    • These are from the original DV Toolkit, and will not work with Pro Tools LE 7.4 or 7.4.2.
  • DigiTranslator enabler file, in your Pro Tools application folder: OMF.bundle (Mac) or OMF.dll (Windows)
  • DINR LE (plug-in is named "Broadband Noise Reduction LE", iLok license is named "BNR LE")
  • Synchro Arts VocALign Project LE (plug-in is named "VocALignLE", iLok license is named "VocALign Project LE")
  • MP3 Option
TL Space Native Edition is also included in the DV Toolkit 2, but is not part of this installer, and must be downloaded separately:
The TL Space Impulse Response (IR) Library files can be installed from your TL Space CD. Both additional IRs and the core set of IRs (included with the TL Space installation CD) are [More]
Downloads    
DV Toolkit 2 Guide v7.3 (PDF)
1.29 MB
 Download
Music Production Toolkit Guide v7.3 (PDF)
0.22 MB
 Download
DV Toolkit 2 v7.4 (Windows XP - Vista) for Pro Tools 7.4 or 8.0
23.9 MB
 Download
Music Production Toolkit v7.4 (Mac OS X Tiger) for Pro Tools 7.4
60.5 MB
 Download
Music Production Toolkit v7.4 (Windows XP - Vista) for Pro Tools 7.4 or 8.0
43.71 MB
 Download
DV Toolkit 2 v7.4 (Mac OS X Tiger) for Pro Tools 7.4
29.8 MB
 Download
Music Production Toolkit v7.4.2 (Mac OS X Leopard) for Pro Tools 7.4.2 or 8.0
59.58 MB
 Download
DV Toolkit 2 v7.4.2 (Mac OS X Leopard) for Pro Tools 7.4.2 or 8.0
28.39 MB
 Download
 
Pro Tools LE & M-Powered v7.3.x Optional Software Bundle Installers
 
Pro Tools LE & M-Powered v7.3.x Optional Software Bundle Installers
iLok licenses required

The following optional software and RTAS and/or AudioSuite format plug-ins are compatible with Pro Tools LE 7.3/7.3.1 and Pro Tools M-Powered 7.3/7.3.1 (with the exception of DV Toolkit 2, which is only for Pro Tools LE systems). These plug-ins and software require previous purchase and your iLok authorization for each plug-in and software component (MP3 Option requires your MP3 Option serial authorization code). Demo versions of Music Production Toolkit and DV Toolkit 2 are not available.

The Factory Bundle updates can be used on any Pro Tools 7.x system to update your factory bundle plug-ins to version 7.3.

Music Production Toolkit for Pro Tools LE or Pro Tools M-Powered 7.3/7.3.1 ONLY
Installs the following:
  • Music Production Toolkit enabler file, in your Pro Tools application folder: MusicProductionToolkit.bundle (Mac) or MusicProductionToolkit.dll (Windows)
  • DINR LE (plug-in is named "Broadband Noise Reduction LE", iLok license is named "BNR LE")
  • Hybrid
  • Smack! LE
  • SoundReplacer
  • MP3 Option
TL Space Native Edition is also included in the Music Production Toolkit, but is not part of this installer, and must be downloaded separately:
The TL Space Impulse Response (IR) Library files can be installed from your TL Space CD. Both additional IRs and the core set of IRs (included with the TL Space installation CD) are available here:
DV Toolkit 2 for Pro Tools LE 7.3/7.3.1 ONLY
Installs the following:
  • DV Toolkit 2 enabler file, in your Pro Tools application folder: DVToolkit2.bundle (Mac) or DVToolkit2.dll (Windows)
    • Make sure that you have removed the timecode.bundle or timecode.dll file from your Pro Tools folder.
    • These are from the original DV Toolkit, and will not work with Pro Tools LE 7.3.
  • DigiTranslator enabler file, in your Pro Tools application folder: OMF.bundle (Mac) or OMF.dll (Windows)
  • DINR LE (plug-in is named "Broadband Noise Reduction LE", iLok license is named "BNR LE")
  • Synchro Arts VocALign Project LE (plug-in is named "VocALignLEX or VocALignLE", iLok license is named "VocALign Project LE")
  • MP3 Option
TL Space Native Edition is also included in the DV Toolkit 2, but is not part of this installer, and must be downloaded separately:
The TL Space Impulse Response (IR) Library files can be installed from your TL Space CD. Both additional IRs and the core set of IRs (included with the TL Space installation CD) are available here:
003 Factory, 003 Rack Factory, Digi 002 Factory, Digi 002 Rack Factory, Producer Factory Pro Bundle Plug-Ins v7.3 for Pro Tools 7.x
Includes a single installer for the following plug-ins:
  • Bomb Factory BF-3A
  • moogerfooger Ring Modulator
  • moogerfooger Analog Delay
  • SansAmp PSA-1
  • Cosmonaut Voice
  • JOEMEEK SC2
  • JOEMEEK VC5
  • Tel-Ray Variable Delay
  • Voce Spin
  • Voce Chorus/Vibrato
The downloads include individual installers for D-Fi and Maxim plug-ins.

Mbox 2 Pro Factory, [More]
Downloads    
003-002 Factory & Producer Factory Pro Bundle Plug-ins v7.3 (Mac OS X Tiger) for Pro Tools v7.0-7.3
87.67 MB
 Download
Music Production Toolkit v7.3 (Mac OS X Universal Binary)
60.45 MB
 Download
Mbox 2 Factory & Producer Factory Bundle Plug-ins v7.3 (Mac OS X Tiger) for Pro Tools v7.0-7.3
33.45 MB
 Download
DV Toolkit 2 v7.3 (Mac OS X Universal Binary)
31.95 MB
 Download
DV Toolkit 2 Guide v7.3 (PDF)
1.29 MB
 Download
Music Production Toolkit v7.3 (Windows XP)
37.87 MB
 Download
003-002 Factory & Producer Factory Pro Bundle Plug-ins v7.3 (Windows XP) for Pro Tools v7.0-7.3
46.56 MB
 Download
DV Toolkit 2 v7.3 (Windows XP)
17.97 MB
 Download
Mbox 2 Factory & Producer Factory Bundle Plug-ins v7.3 (Windows XP) for Pro Tools v7.0-7.3
19.47 MB
 Download
Music Production Toolkit Guide v7.3 (PDF)
0.22 MB
 Download
Pro Tools LE Factory Plug-Ins v2 Read Me
0.03 MB
 Download
 
Pro Tools LE 7.1cs10 Update for Mac OS X (PowerPC)
 
Pro Tools LE 7.1cs10 Update for Mac OS X (PowerPC)
October 5, 2006

For Digi 002, Digi 002 Rack, Mbox or Mbox 2 Systems with Pro Tools LE 7.1 for Mac OS X 10.4 ("Tiger") for PowerPC-Based Macs Only
  • This update will not work without Pro Tools LE 7.1 for Mac OS X already installed. If you are on Pro Tools LE 7.0, you will first need to update to Pro Tools LE 7.1:
  • This update is NOT for Mbox 2 Pro systems

What's Fixed in Pro Tools LE 7.1cs10?



Pro Tools LE 7.1cs10 for Mac OS X contains the following:

Fixed: Importing Files By Drag and Drop Could Prevent The Session From Being Saved (Item #80417)
  • MP3, MP4, WAV and AIFF were affected
  • A subsequent Save, Save As, Save A Copy or Auto-Backup would result in an assertion error
  • Note: this problem was inadvertently introduced in Pro Tools LE 7.1cs9
Fixed - Standard Type 1 MIDI files, exported from Pro Tools 7.x, could not be read by some applications (item #71254)

Fixed: Relink Problems When Using Mtools, Soundminer, or NetMix to import files (Item #81138)
  • Using "Automatically Copy on Import" created a duplicate file only when using Soundminer. Only the Pro Tools-created file (with an appended "2") was assigned a Unique ID.
  • No Unique ID was being added to files imported by Mtools or Netmix
  • The relink problems would occur when reopening the session
Fixed: Problems When Launching in a Microsoft Active Directory Configuration (Item #75908)
  • When using local storage the error posted was "Unable to Locate Digidesign Hardware."
  • Note: This fix was previously issued in Pro Tools 7.1cs7, but failed in later versions due to an installer problem.

Fixes Included from Pro Tools LE 7.1cs9:



Fixed: Pro Tools Always Overwrites Automation in Existing Playlists When Using "Import (Session Data): Overlay New on Existing Playlists" (Item #63172)

Pro Tools would not allow a session with a 2-hour start time to overlay automation data on a session with a 1 hour start time without clearing all automation before 2 hours on the destination session.

Automation cannot be "combined" with an overlay—the destination session’s automation will be replaced from the Session Start time of the source session.

Inserts and sends must be consistent between sessions or they may be overwritten.

Fixed: Volumes With Japanese Naming Will Not Mount In DigiBase (Item #73463)

DVD, CD, and hard drive volumes with Japanese naming will not mount in DigiBase.

It was also not possible to create a Pro Tools session on a Japanese-named volume without getting an error.

Fixed: Some Automation Moves Could Be Written Incorrectly When Writing Immediately After A "Play" Command (Item #78032)

This could occur when touching a control immediately after a "play" command, but before the transport started moving.

Fixed: Potential Problems When Relinking Audio Files (Item #77061, #79230)

If DigiTranslator was not installed, Pro Tools would assign a new unique ID to a copy of an Avid audio file when using "Save A Copy." This was because Pro Tools required DigiTranslator to read Avid unique IDs.

Files without unique IDs imported into Pro Tools could not be later relinked if the file name had later been changed by [More]
Downloads    
DV Toolkit 2 CS7 for Non-Admin Accounts on Mac OS X (PPC)
12.23 MB
 Download
Music Production Toolkit CS7 for Non-Admin Accounts on Mac OS X (PPC)
33.84 MB
 Download
Pro Tools LE 7.1cs10 Update for Mac OS X (PPC)
26.15 MB
 Download
Pro Tools LE 7.1cs10 Read Me for Mac OS X (PPC)
0.05 MB
 Download
 
Pro Tools LE 7.4cs9 Update for Windows
 
Pro Tools LE 7.4cs9 Update for Windows

March 31, 2009 — Read Me Document (Included with Download)

For 003 Factory, 003 Rack, 003 Rack+, Digi 002, Digi 002 Rack, Mbox 2 Pro, Mbox 2, Mbox 2 Mini, Mbox 2 Micro, and Mbox Systems with Pro Tools LE 7.4 Only
  • Single installer for Windows XP and Vista
  • This update requires previous installation of Pro Tools LE 7.4

Who Should Use This Update?



This update contains fixes in the following areas:
  • Session/File Management
  • Editing
  • QuickTime Video

Plus previous fixes and changes in the following areas:
  • Recording
  • Reason Adapted
  • Importing Audio
  • DigiBase
  • Fade files
  • Automation
  • Modification: Expand to New Tracks by Time Code Only
    • Requires DV Toolkit 2
  • File Comments in WAV files
  • MIDI
  • 003
  • Plug-ins
  • PAL/Mojo
  • User Interface
  • RTAS processing on AMD-based computers
  • Dynamics III
  • Elastic Time
  • Using Soundminer
  • Avid Video Peripherals (Windows XP)
  • Digidesign Control Surfaces:
    • Command|8
    • C|24
    • Control|24
    • 003 Factory (console)
    • Digi 002 (console)

Pro Tools LE 7.4cs9 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.


What’s Included in Pro Tools LE 7.4cs9 for Windows?



Fixed: Converting sample rate during Save Copy In or Import Session Data adversely affects volume automation (Item #111930)
  • Saving a session copy with sample rate conversion to a rate different from the session's may result in erroneous automation ramps between breakpoints. This is mostly evident in scenarios where a static automation level had been changed over the duration of a single region.

Fixed: Problems moving multiple selected regions (Item #99538)
  • If you selected several adjacent regions, clicking on one of them to move all selected regions will only move the region you clicked on.

Fixed: Incorrect multi-track audio import from QuickTime movies (Item #102279)
  • Multi-track QuickTime movies import into Pro Tools 7.4 with each audio track containing a mix of all tracks, rather than individual tracks.


Included from 7.4cs8:

Fixed: When Recording, Waveform Overviews are Missing or Drawn with Gaps (Item #100862)
  • The audio was not affected, and the waveform could be restored by re-calculating it after the record pass

Fixed: Pro Tools and Reason Crash When Loading "Machine" Patches on Reason Adapted Combinator (Item #106627)
  • Only occurs in Reason Adapted, and does not occur when Reason Adapted is operated without Pro Tools

Fixed: When Importing More than 100 Audio Files, Pro Tools could Close with no Warning (Item #100595)
  • This would occur when importing all of the files at the same time


Included from 7.4cs7:

Fixed: Attempting to Drag and Drop Files Containing iXML metadata from the Workspace Browser Would Result in No Import, and Assertion Errors (Item #100723)
  • The assertion errors would occur when attempting to subsequently save the session
  • Previous workaround was to use File > Import > Audio instead of drag and drop from [More]
Downloads    
Expand to New Tracks by Time Code Only Read Me (PDF)
0.03 MB
 Download
Pro Tools LE 7.4cs9 for Windows Read Me (PDF)
0.09 MB
 Download
Pro Tools LE 7.4cs9 Update (Windows)
51.4 MB
 Download
 
Pro Tools LE 7.4cs9 Update for Mac OS X (Tiger)
 
Pro Tools LE 7.4cs9 Update for Mac OS X (Tiger)

March 31, 2009 — Read Me Document (Included with Download)

For 003 Factory, 003 Rack, 003 Rack+, Digi 002, Digi 002 Rack, Mbox 2 Pro, Mbox 2, Mbox 2 Mini, Mbox 2 Micro, and Mbox Systems with Pro Tools LE 7.4 Only
  • Universal installer for PowerPC and Intel-based Macs on Mac OS X 10.4 ("Tiger")
  • Not supported on Mac OS X 10.5 ("Leopard")
  • This update requires previous installation of Pro Tools LE 7.4

Who Should Use This Update?



This update contains fixes in the following areas:
  • Session/File Management
  • Editing
  • QuickTime Video

Plus previous fixes and changes in the following areas:
  • Recording
  • Reason Adapted
  • DigiBase
  • Fade files
  • Automation
  • Modification: Expand to New Tracks by Time Code Only
    • Requires DV Toolkit 2
  • File Comments in WAV files
  • MIDI
  • Avid Video
  • 003
  • Plug-ins
  • PAL/Mojo
  • Scrubbing with Mojo
  • User Interface
  • Dynamics III
  • Using Soundminer
  • Avid Video Peripherals
  • Elastic Time
  • Digidesign Control Surfaces:
    • Command|8
    • C|24
    • Control|24
    • 003 Factory (console)
    • Digi 002 (console)

Pro Tools LE 7.4cs9 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.


What’s Included in Pro Tools LE 7.4cs9 for Mac OS X?



Fixed: Converting sample rate during Save Copy In or Import Session Data adversely affects volume automation (Item #111930)
  • Saving a session copy with sample rate conversion to a rate different from the session's may result in erroneous automation ramps between breakpoints. This is mostly evident in scenarios where a static automation level had been changed over the duration of a single region.

Fixed: Problems moving multiple selected regions (Item #99538)
  • If you selected several adjacent regions, clicking on one of them to move all selected regions will only move the region you clicked on.

Fixed: Incorrect multi-track audio import from QuickTime movies (Item #102279)
  • Multi-track QuickTime movies import into Pro Tools 7.4 with each audio track containing a mix of all tracks, rather than individual tracks.


Included from 7.4cs8:

Fixed: When Recording, Waveform Overviews are Missing or Drawn with Gaps (Item #100862)
  • The audio was not affected, and the waveform could be restored by re-calculating it after the record pass

Fixed: Pro Tools and Reason Crash When Loading "Machine" Patches on Reason Adapted Combinator (Item #106627)
  • Only occurs in Reason Adapted, and does not occur when Reason Adapted is operated without Pro Tools


Included from 7.4cs7:

Fixed: Attempting to Drag and Drop Files Containing iXML metadata from the Workspace Browser Would Result in No Import, and Assertion Errors (Item #100723)
  • The assertion errors would occur when attempting to subsequently save the session
  • Previous workaround was to use File > Import > Audio instead of drag and drop from the Workspace

Fixed: Despite Changing the Fade Shapes in the Fade Dialog, Fade-ins and Fade-outs Always Conformed to the Last Created Fade In and Out [More]
Downloads    
Expand to New Tracks by Time Code Only Read Me (PDF)
0.03 MB
 Download
Pro Tools LE 7.4cs9 for Mac Read Me (PDF)
0.08 MB
 Download
Pro Tools LE 7.4cs9 Update (Mac OS X Tiger)
105.59 MB
 Download
 
Pro Tools LE 7.4.2cs3 Update for Mac OS X (Leopard)
 
Pro Tools LE 7.4.2cs3 Update for Mac OS X (Leopard)

March 31, 2009 — Read Me Document (Included with Download)

For 003 Factory, 003 Rack, 003 Rack+, Digi 002, Digi 002 Rack, Mbox 2 Pro, Mbox 2, Mbox 2 Mini, Mbox 2 Micro, and Mbox Systems with Pro Tools LE 7.4.2 for Mac OS X "Leopard" Only
  • Universal installer for PowerPC and Intel-based Macs on Mac OS X 10.5.3 and 10.5.4
  • This update requires previous installation of Pro Tools LE 7.4.2:

Who Should Use This Update?



This update contains fixes in the following areas:
  • Session/File Management
  • Editing
  • QuickTime Video

Plus previous fixes and changes in the following areas:
  • Automation
  • Reason Adapted
  • Recording
  • Modification: Expand to New Tracks by Time Code Only
    • Requires DV Toolkit 2
  • DigiBase
  • Fade files
  • File Comments in WAV files
  • MIDI
  • Avid Mojo/Mojo SDI

Pro Tools LE 7.4.2cs3 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.


What’s Included in Pro Tools LE 7.4.2cs3 for Mac OS X?



Fixed: Converting sample rate during Save Copy In or Import Session Data adversely affects volume automation (Item #111930)
  • Saving a session copy with sample rate conversion to a rate different from the session's may result in erroneous automation ramps between breakpoints. This is mostly evident in scenarios where a static automation level had been changed over the duration of a single region.

Fixed: Problems moving multiple selected regions (Item #99538)
  • If you selected several adjacent regions, clicking on one of them to move all selected regions will only move the region you clicked on.

Fixed: Incorrect multi-track audio import from QuickTime movies (Item #102279)
  • Multi-track QuickTime movies import into Pro Tools 7.4 with each audio track containing a mix of all tracks, rather than individual tracks.


Included from 7.4.2cs2:

Fixed: Volume Breakpoints at "- inf" Could Change to Full Volume When Manually Trimming Automation (Item #104551)
  • This could occur when trying to trim breakpoints at minus infinity down a few dB

Fixed: Pro Tools and Reason Crash When Loading "Machine" Patches on Reason Adapted Combinator (Item #106627)
  • Only occurs in Reason Adapted, and does not occur when Reason Adapted is operated without Pro Tools

Fixed: When Recording, Waveform Overviews are Missing or Drawn with Gaps (Item #100862)
  • The audio was not affected, and the waveform could be restored by re-calculating it after the record pass


Included from 7.4.2cs1:

Modified: Expand to New Tracks by Time Code Only (Item #102582)
Please Note: Time code features in Pro Tools LE require optional purchase of DV Toolkit 2

Expand To New Tracks By Time Code Only capability lets you expand a track or selected region to new tracks, revealing all other regions recorded at the same time code location, regardless of channel name or number. In previous versions, other metadata needed to match in addition to time code for this feature [More]
Downloads    
Expand to New Tracks by Time Code Only Read Me (PDF)
0.03 MB
 Download
Pro Tools LE 7.4.2cs3 Update (Mac OS X Leopard)
98.59 MB
 Download
Pro Tools LE 7.4.2cs3 Read Me (PDF)
0.08 MB
 Download
 
DV Toolkit 2 Option for Pro Tools LE 8.0 — Installation & Downloads
 
DV Toolkit 2 Option for Pro Tools LE 8.0 — Installation & Downloads

iLok licenses required

For more information about current optional software, see Pro Tools LE and M-Powered Options in the Products section. Please Note: DV Toolkit 2 and Complete Production Toolkit are Pro Tools LE options only, not compatible with Pro Tools M-Powered.

For complete details on available toolkit upgrades, please see the following page:

The following optional software and RTAS and/or AudioSuite format plug-ins are compatible with Pro Tools LE 8.0. These plug-ins and software require previous purchase and your iLok authorization for each plug-in and software component (MP3 Option requires your MP3 Option serial authorization code or MP3 Option iLok license). Demo versions of DV Toolkit 2 are not available.

DV Toolkit 2 for Pro Tools LE 8.0
Pro Tools LE 8.0 must already be installed on your system to use this optional software installer. Installs the following:
  • DV Toolkit 2 enabler file, in your Pro Tools application folder: DVToolkit2.bundle (Mac) or DVToolkit2.dll (Windows)
    • Make sure that you have removed any older files named timecode.bundle or timecode.dll file from your Pro Tools folder (files with this name are from the original DV Toolkit, and will not work with Pro Tools LE 7.1 and higher).
  • DigiTranslator enabler file, in your Pro Tools application folder: OMF.bundle (Mac) or OMF.dll (Windows)
  • DINR LE (plug-in is named "Broadband Noise Reduction LE", iLok license is named "BNR LE")
  • MP3 Option
  • X-Form plug-in (see note below)

Installation Notes



TL Space Native Plug-in
The TL Space Native Edition plug-in installer/updater is included in the DV Toolkit 2 v8.0 web installers, but does NOT include the TL Space Impulse Response (IR) Library files. These IR library files can be installed from your TL Space CD. Both additional IRs and the core set of IRs (included with the TL Space installation CD) are available here:

Synchro Arts VocALign Project LE Plug-in
VocALign Project LE was included with the original DV Toolkit and DV Toolkit 2 sold prior to the release of Pro Tools 8, but was replaced with the Digidesign X-Form plug-in in the current version of DV Toolkit 2. If you own VocALign Project LE, you would have a license on your iLok named "VocALign Project LE".
Go to Downloads section there for VocALign Project LE for DV Toolkit & original DV Toolkit 2 owners. When installed, the plug-in is named "VocALignLE".

Digidesign X-Form Plug-in
X-Form is included with the current DV Toolkit 2 released in late 2008. Upgrades to the new DV Toolkit 2 with X-Form are available from the online DigiStore. To purchase the upgrade, go to the DV Toolkit 2 product section on the main website, click on the "Buy Now" button, and choose "DVTK 2 to New DVTK 2 Upgrade Download" from the pull-down list on the DigiStore (an upgrade from the original DVTK is also available).
If you do NOT own X-Form, you should uncheck the [More]
Downloads    
DV Toolkit 2 Guide v8.0 (PDF)
1.68 MB
 Download
DV Toolkit 2 Read Me v8.0 (PDF)
0.06 MB
 Download
DigiTranslator for Pro Tools 8.0 (Mac)
6.27 MB
 Download
MP3 Option for Pro Tools 8.0 (Mac)
5.78 MB
 Download
DigiTranslator for Pro Tools 8.0 (Win)
3.34 MB
 Download
MP3 Option for Pro Tools 8.0 (Win)
4.83 MB
 Download
DV Toolkit 2 v8.0 (Win)
39.71 MB
 Download
DV Toolkit 2 v8.0 (Mac)
47.59 MB
 Download
 

 
Support Search
Search
  Next