 Windows Machine running DigiTest posts a "dsp error 42"
|
| Windows Machine running DigiTest posts a "dsp error 42" |
This was in direct relation to a hidden hardware conflict. Removing the Sound Blaster Live Platinum audio card resolved the issue.
[Page View]
|
|
|
DigiTest 5.0.2 or 5.1 returns "failed SCSI suicide test, 710 script RAM" ...
|
| DigiTest 5.0.2 or 5.1 returns "failed SCSI suicide test, 710 script RAM" on a system with a Disk I/O on a G4 dual processor machine but Pro Tools runs fine on the card. |
DigiTest 5.0.2 does not support the G4 dual processor machines.
Use DigiTest 5.1.1b1. Located in Pro Tools 5.1 Installer > Beta/Bug Fix Software > DigiTest Beta - New 5-Slot Macs folder.
DigiTest does test the SCSI chip on a Disk I/O by turning it on and off so this error can indicate a problem with this chip.
[Page View]
|
|
|
After installing Pro Tools HD, Mix or LE for Window XP, you get the following ...
|
| After installing Pro Tools HD, Mix or LE for Window XP, you get the following message upon launch: "This software requires installation of certain device drivers and a reboot before running. Please reboot or install the software." |
Pace system files have become corrupted or are not installed.
ADD/REMOVE Pace system files and re-install them from the Pro Tools CD or the Pace website.
[Page View]
|
|
|
Which files are installed with Pro Tools 5.01 and where should they be ...
|
| Which files are installed with Pro Tools 5.01 and where should they be located? |
In Mac HD > Digidesign:
Document Readers Folder
(Other Digidesign Applications, if installed)
Pro Tools Folder
Pro Tools Utilities folder
DigiTest
Track Transfer Utility Folder
Calibration Mode Templates Folder (TDM only)
OMF Tool Folder if installed (TDM only)
Pro Tools (Application)
Release Notes & Documentation Folder
-----------------------------------------------------
In Mac HD> System Folder > DAE Folder:
Codecs Folder
Controllers Folder
DAE (application)
Plug-In Settings Folder
Plug-Ins Folder
16 or 24 bit Optimized Mixer (required)
Other plug-ins
Plug-Ins (Unused) Folder
-----------------------------------------------------
In Mac HD> System Folder > Control Panels:
OMS Preferrred Device
Digidesign Sound (if applicable - v5.01/OS9 and higher)
----------------------------------------------------
In Mac HD> System Folder > Extensions:
Digidesign DSP Manager
Digisystem INIT
Open Music system
Digidesign Stream Manager (if applicable/needed)
Digidesign Output Drivers (if applicable/needed)
Digidesign Direct I/O (if applicable/needed - v5.01/OS9 and higher)
[Page View]
|
|
|
Digitest reports a 1022 error on the 2nd Mix I/O card in my D24 system. ...
|
| Digitest reports a 1022 error on the 2nd Mix I/O card in my D24 system. |
Only 2 "D24 type' cards are supported in the same system.
D24 Audio cards and Mix I/O cards are considered 'D24 type' cards.
User had a Mix Farm, D24, Mix I/O, 2nd Mix I/O, & DSP Farm.
Pro Tools 5.01 and Digitest 5.02
[Page View]
|
|
|
DigiTest 5.0 fails to recognize all MIX Core and MIX Farms in a Biege ...
|
| DigiTest 5.0 fails to recognize all MIX Core and MIX Farms in a Biege G3. |
Fixed in DigiTest 5.0.1b1.
[Page View]
|
|
|
"Unable to create a DAE deck" while launching Pro Tools LE 5.0.
|
| "Unable to create a DAE deck" while launching Pro Tools LE 5.0. |
- Verify that the Digi 001 card is firmly seated in the PCI slot (it can easily pop out when snapping on the I/O connector cable if the user has not screwed in the card).
- Verify that the I/O cable is seated at both the card and Interface.
The red ADAT optical OUTPUT light (ADAT light pipe) gets its power from the PCI slot. If the card is not firmly seated, it will NOT be lit.
Running DigiTest verified that the card was not present. DigiTest did not see any card in the PCI slot but did see a SCII card (that was seated correctly). Also , as a quick check, if the card is seated correctly, the little red ADAT optical OUTPUT light will be lit.
[Page View]
|
|
|
SampleCell II Plus with Blue & White G3s:
|
| SampleCell II Plus with Blue & White G3s: |
If you are using SampleCell II Plus on a new Blue and White G3 and are experiencing installation problems, please download DigiTest 3.3.0 and the DAE/DSI 3.4.2 installer.
Download DAE/DSI 3.4.2 from the Software Section at
http://www.digidesign.com/download/daedsi
Download DigiTest 3.3.0 from the Software Section at
http://www.digidesign.com/download/digitest
[Page View]
|
|
|
"Test is disabled because no digidesign card exists." when running Digitest ...
|
| "Test is disabled because no digidesign card exists." when running Digitest 3.3 on a B&W G3. |
Verify that DSI 3.42 (necessary for B&W G3 operation) is installed.
[Page View]
|
|
|
"TDM transmission fails, can't find TDM monitor card" error after running ...
|
| "TDM transmission fails, can't find TDM monitor card" error after running DigiTest. |
Verify that the DigiSystem INIT and DAE are installed.
[Page View]
|
|
|
