 DAE error -1113 when launching Pro Tools Free (Windows 98 SE).
|
| DAE error -1113 when launching Pro Tools Free (Windows 98 SE). |
This error occurs if the WIN 98 WaveDriver is not installed, is disabled, or is installed incorrectly. Resources must be assigned to the hardware before Pro Tools is installed. Therefore, it is imperative that you follow the installation procedure as it is documented.
[Page View]
|
|
|
When I try to launch Pro Tools LE for Windows the message "Missing cfd.dll" ...
|
| When I try to launch Pro Tools LE for Windows the message "Missing cfd.dll" or "Cannot find cfd.dll" appears on the screen. |
These errors can occur if you install Pro Tools before installing the WaveDriver, or have an incorrect driver installation. Resources must be assigned to the hardware before Pro Tools is installed. Therefore, it is imperative that you follow the installation procedure documented in Chapter 3 (specifically, pages 19-21) of the Getting Started with Digi 001 Guide.
This guide is available for download at http://www.digidesign.com/support/documents.html
[Page View]
|
|
|
Windows 98SE WaveDriver de-installation warning
|
| Windows 98SE WaveDriver de-installation warning |
June 2, 2000
If you have a Digidesign WaveDriver installed (regardless of version) in your WinTel computer, you must de-install it before installing the latest WaveDriver and the Pro Tools 5.0.1 LE software update.
Instructions at http://www.digidesign.com/support/readme/win98se_wvdrvr_remove.html
[Page View]
|
|
|
What are the files that make up a install of the WaveDriver and Pro Tools ...
|
| What are the files that make up a install of the WaveDriver and Pro Tools LE. |
The WaveDriver installation consists of the following files:
In Windows\System
Digi32.dll v. 1.6.0.329 (Wave driver only)
DioMidi.dll v. 5.0.1.329 (MIDI driver)
Digi16.dll (no version resource supported)
DigiMM.dll v. 5.0.1.329
Dalvxd.vxd v. 5.0.1.329
DigiProx.exe (no version resource supported)
DirectIO.dll v. 5.0.1.329 (Wave driver only)
DSI.dll v. 5.0.1.329
DigiUI.dll v. 5.0.1.329
Msvcrt.dll
Mfc42.dll 4/23/99, v. 6.00.8397.0
In Windows\System32\Drivers
Dalwdm.sys v. 5.0.1.329
In Windows\Inf\Other
DigidesignDALWDM.inf
In Windows\system
DAE.dll (is installed by Pro Tools LE)
[Page View]
|
|
|
When trying to record audio in programs like Wave lab and Sound Forge, ...
|
| When trying to record audio in programs like Wave lab and Sound Forge, I get static, clicks in the audio, or pulse sounds recorded with the audio on my hard drive. |
This can happen when trying to record to a 9 Gigabyte hard drive or larger that has been formatted with Fat 32 file format.
You can most likely fix the problem by adjusting the buffer size from medium to small in the setting options for the Wave driver in the Multimedia control panels.
[Page View]
|
|
|
After installing the WaveDriver, I can’t see it in the Multimedia control ...
|
| After installing the WaveDriver, I can’t see it in the Multimedia control panels under the advance tab. |
This can be caused by :
1) Installing the WaveDriver with the add new hardware control panel instead of specifying the location of the driver when the Digi hardware was first detected.
2) Forgetting to restart after the install of the WaveDriver. (Note: After installing the WaveDriver, there is no prompt to restart the computer, so the user may think that they do not need to restart the computer after the install.)
[Page View]
|
|
|
How do I setup Sound Forge for recording and playback through the Digi ...
|
| How do I setup Sound Forge for recording and playback through the Digi hardware. |
1. Start Sound Forge
2. Go to Options > Preferences.
3. Click on the Wave tab.
4. in the record and playback boxes, choose Digidesign Wave driver.
[Page View]
|
|
|
How do I get the WaveDriver to install If I installed it with the add ...
|
| How do I get the WaveDriver to install If I installed it with the add new hardware control panel. |
There are two ways:
1) Remove your Digi 001 or Audiomedia III from the Device Manager, and then delete the digidesigndalwdm.inf file in directory path of C:\Windows\inf\other\digidesigndalwdm.inf
Then restart the computer. After the computer restarts, windows will detect the Digi hardware again. After Windows detects the hardware, choose specify location and browse to the folder where the WaveDriver is on the Pro Tools disc.
2) You can also use the update driver option under the driver tab for the Digi 001\Audiomedia III in Device Manager. (This will only work if the user had installed using the add new hardware control panel to install the driver).
[Page View]
|
|
|
How do I playback 8-bit 11 kHz sound files in third party audio programs. ...
|
| How do I playback 8-bit 11 kHz sound files in third party audio programs. |
1) make sure that your Digidesign hardware is the the preferred device in the multimedia control panels.
2) Go into the preferences of the third party audio application and set the playback and record audio options to Microsoft Sound Mapper and click OK. Now try to playback the audio file.
[Page View]
|
|
|
How do I setup Wave lab for Recording and playback through the Digidesign ...
|
| How do I setup Wave lab for Recording and playback through the Digidesign hardware. |
1. Start Wave Lab
2. Go to Options > Preferences
3. Choose the audio card tab
4. In the recording and playback boxes choose the Digidesign Wave driver.
[Page View]
|
|
|
