When looking at the pin-out diagrams for the XMON, I can't tell which ...

When looking at the pin-out diagrams for the XMON, I can't tell which signal paths are associated with which cable on my DigiSnake. When looking at the tables top-down, the first path is cable 1 and the last is cable 8 going sequentially in between. [Page View]

What are the available DigiSnake, DB25 DigiLink, TDM Flex and Firewire ...

What are the available DigiSnake, DB25 DigiLink, TDM Flex and Firewire cables that Digidesign currently sells? Check the DigiStore for current product. ProControl DigiSnake Kit 9940-09168-00 Control 24 XLR/TRS DigiSnake Kit 9940-09027-00 Control 24 TRS DigiSnake Kit 9940-09802-00 DB25-XLR M+F AES/EBU Snake, 12' 9940-09645-00 DB25-XLRM Snake, 12' 9940-09648-00 DB25-XLRF Snake, 12' 9940-09649-00 DB25-TRS Snake, 12' 9940-09650-00 DB25-DB25 Snake, 12' 9940-09651-00 DB25-DB25 Snake, 25' 9940-09652-00 DB25-DB25R ProControl Snake, 25' 9940-09653-00 DB25-TS +4/-10 db Padded Digisnake, 12' 9940-09892-00 DB25-DB25 TDIF ONLY Snake, 12' 9940-09939-00 DB25-XLR M+F AES/EBU Snake, 4' 9940-10425-00 DB25-XLRM Snake, 4' 9940-10426-00 DB25-XLRF Snake, 4' 9940-10427-00 DB25-TRS Snake, 4' 9940-10428-00 DB25-DB25 Snake, 4' 9940-10429-00 DB25-TS +4/-10 db Padded Digisnake, 4' 9940-10430-00 DigiLink 1.5' 9940-29658-00 DigiLink 12' 9940-29661-00 DigiLink 25' 9940-29891-00 DigiLink 50' 9940-29252-03 DigiLink 100' 9940-29252-04 DigiLink 200' 9940-29252-05 TDMII Flex Cable Replacement 9940-09905-00 4 to 6 pin FireWire Cable for 002 9940-10779-00 [Page View]

Do the analog DB-25 DigiSnakes for the 192 I/O use the same pinout as ...

Do the analog DB-25 DigiSnakes for the 192 I/O use the same pinout as Tascam DA-88 analog cables? Yes. The pinouts are identical. Make sure that the Tascam cables are actually ANALOG cables, as Tascam's DIGITAL format (TDIF) uses a different pinout altogether, as do AES cables and many other DB-25 snakes. For pinout diagrams see the Digidesign 192 I/O User Guide: [Page View] Downloads     192 I/O Guide (PDF) 0.65 MB Download

"Unable to create DAE deck" on launch of Pro Tools.

"Unable to create DAE deck" on launch of Pro Tools. The following chassis, shipped after January 2002, did not recognize Pro Tools|24 MIX cards when installed. * Digidesign 7-slot chassis * SBS 7-slot chassis * SBS 13-slot chassis DigiSystem INIT 5.1.3cs5 resolves this issue. It can be downloaded from the Digidesign website at: http://www.digidesign.com/download/daedsi [Page View]

What are the specifications for the screws on DigiSnake DB-25 connectors? ...

What are the specifications for the screws on DigiSnake DB-25 connectors? Would these be the same screws for Tascam DB-25 cables? The threads on our ProControl D-Sub connectors are standard American 4-40 thread. We use the same DB-25 connectors on the ProControl Control Surface and the Audio Interface 192 I/O. The same connectors are also used by Fostex, and on older Tascam DA-88s. [Page View]

Didn't Digidesign already offer cable kits like the DigiSnake Kits?

Didn't Digidesign already offer cable kits like the DigiSnake Kits? Yes, they were formerly known as the ProControl Cable Kit and Control|24 Cable Kit. We changed the name to DigiSnake Kits with the introduction of the individual DigiSnakes. Model numbers and pricing have not changed. We also added an all TRS version of the Control|24 DigiSnake Kit. [Page View]

What are DigiSnake Kits?

What are DigiSnake Kits? DigiSnake Kits are multiple DigiSnakes that are custom labeled and designed specifically for Digidesign Control Surfaces, all in one box. These kits make for a quick and easy "all cables in one box" solution for ProControl or Control|24. There are three DigiSnake Kits available. ProControl DigiSnake Kit -- Product MC100-C Includes the following three 8-channel snakes: - DB25 to 8 XLR Female (2) - DB25 to 8 XLR Male (1) Control|24 XLR/TRS DigiSnake Kit -- Product MC124-C Includes the following seven 8-channel snakes: - DB25 to 8 XLR Female (2) - DB25 to 8 XLR Male (3) - DB25 to 8 TRS (2) Control|24 TRS DigiSnake Kit -- Product MC124-TRS Includes the following seven 8-channel snakes: - DB25 to 8 TRS snakes (7) [Page View]

What features do DigiSnakes offer?

What features do DigiSnakes offer? Uniquely designed for use with Digidesign products Custom colored and labeled Include stress relieving cable bales Lifetime warranty 110 Ohm "Digital Grade" cable suitable for analog or digital use Available from your local Digidesign dealer, making for an easy, quick cable solution to get your Pro Tools|HD system up and running immediately. [Page View]

What products use DigiSnake cables?

What products use DigiSnake cables? 192 I/O (A/D card, D/A card, and Digital I/O card) 192 Digital I/O (has 2 digital I/O cards, but no Analog I/O) 192 A/D option card (expansion for 192 I/O) 192 D/A option card (expansion for 192 I/O) 192 Digital option card (expansion for 192 I/O) Control|24 ProControl PRE I/O Note: The 96 I/O and 96i I/O use TRS connectors, not DB25. [Page View]

What DigiSnakes does Digidesign offer?

What DigiSnakes does Digidesign offer? DB25-XLR M+F AES/EBU Snake DB25 to 4 XLR Male and 4 XLR Female. Below 192 KHz, AES/EBU carries 2 channels per line, so this snake transmits 8 out and 8 in via the 8 XLR connectors. At 192kHz sample rate, the 192 I/O is using dual wire transmission. This means the AES snake transmits 4 out and 4 in at 192 kHz. In this case, the connector labeled "output 1&2" is output 1, "output 3&4" is output 2, and so forth. The 4 XLRF wire jackets are yellow; the 4 XLRM jackets are black, all with appropriate labeling.. Product MH080; Length: 12 feet. DB25-XLRM Snake DB25 to 8 XLR Male; Output snake. Analog or digital. Red jackets on both ends with appropriate labeling. Product MH081; Length: 12 feet. DB25-XLRF Snake DB25 to 8 XLR Female; Input snake. Analog or digital. Blue jackets on both ends with appropriate labeling. Product MH082; Length: 12 feet. DB25-TRS Snake DB25 to 8 balanced TRS connectors for audio input or output Analog or digital. Orange jackets on both ends with appropriate labeling. Product MH083; Length: 12 feet. DB25-DB25 Snake DB25 to DB25, standard wiring. White (12 foot) or green (25 foot) jackets on both ends. Typically used for communication between any two standard - - - DB25-equipped devices; For example, PRE out to 192 I/O analog in. Cannot be used for AES/EBU or TDIF digital dubbing. For TDIF dubbing, use the TDIF DigiSnake (below). For AES/EBU digital dubbing, use two AES/EBU DigiSnakes, connected end to end (XLR to XLR). Product MH084; Length: 12 feet. Product MH085; Length: 25 feet. DB25-DB25R ProControl Snake DB25 to pin-reversed DB25. This DigiSnake was developed specifically to compensate for the reversed pin outs on the ProControl. Typically used to connect the 192 I/O output to the audio input of the ProControl. Purple jackets on both ends with appropriate labeling. Product MH086; Length: 25 feet. DB25-TS +4 dBu/-10 dBV Padded DigiSnake Balanced +4 dBu DB25 to unbalanced -10 dBV TS snake. This snake contains the appropriate padding circuit to reduce the 192 I/O's +4 dBu output signal down to -10 dBV. For +4 dBu output only. Use any other input snake for return/input. Grey jackets on both ends with appropriate labeling. Product MH087; Length: 12 feet. DB25-DB25 TDIF Only DigiSnake TDIF Digital (dubbing) cable. Designed for digital TDIF transfers only. Can only be used for TDIF to TDIF- i.e., Tascam MDM to 192 I/O TDIF connector. Cannot be used for AES/EBU digital dubbing. For AES/EBU digital dubbing, use two AES/EBU DigiSnakes, connected end to end (XLR to XLR). Brown jackets on both ends with appropriate labeling.. Product MH095; Length: 12 feet. [Page View]

	Support Search Search	Next