When launching Pro Tools 32T beta, the software quits and the following ...

When launching Pro Tools 32T beta, the software quits and the following message is posted:"Pro Tools unexpectedly quit. Mac OS Type 2 error." In one case, the problem was caused due to a conflict with QuickTime Musical Instruments. Disabling QuickTime MI in the current OMS Studio Setup file solved the problem. [Page View]

Digi 002 faders reset (a.k.a. slam) down to -inf when a change is made ...

Digi 002 faders reset (a.k.a. slam) down to -inf when a change is made to OMS Setup while Pro Tools LE is running. This occurs even if Digi 002's Fader Mute is engaged prior to launching OMS Setup. A new version of firmware fixes this issue. It is available from: http://www.digidesign.com/download/digi002.html Making changes to the OMS setup, i.e. define an instrument, delete a defined instrument, or change the icon of a defined instrument, can cause this fader behavior. [Page View]

Enabling Quicktime Musical Instruments in OMS causes major instability ...

Enabling Quicktime Musical Instruments in OMS causes major instability in Pro Tools (errors -6082 and -9129) and eventually leads to a hard CPU freeze on Pro Tools 5.3.2 and a Digi 002. At this time, Quicktime Musical Instruments is not recommended for use with Digi 002. [Page View]

OMS Setup crashes with the Digi 002 driver installed.

OMS Setup crashes with the Digi 002 driver installed. Make sure all the Pro Tools 5.3.2 extensions are enabled before creating a new OMS setup. For a complete list of the Digi 002 extensions, see Answerbase 25822. [Page View]

The MMC output port does not exist in the current OMS setup. MMC will ...

The MMC output port does not exist in the current OMS setup. MMC will be disabled. The MIDI ports are not enumerated when 002 is powered up after launching Pro Tools LE. Power up 002 BEFORE launching Pro Tools LE. [Page View]

How do I use the Pro 52 software synth in Pro Tools LE 5.3.2?

How do I use the Pro 52 software synth in Pro Tools LE 5.3.2? OMS must be setup to reflect which MIDI interface and MIDI controller you are using. 1) Install the Software for Native Instruments' Pro 52. Restart. 2) Launch Pro Tools and open a session. 3) Create a Stereo Aux. Input track. File Menu > New Track > Create a Stereo Aux. Input track > Create. 4) In the Mix Window, instantiate the Multi - Channel plug-in for Pro 52. 5) Create a MIDI track. File Menu > New Track > MIDI track > Create. 6) Set the output of the MIDI track to Digi 001 Pro 52, 1. 7) If you want to use more channels of the Pro 52, you will have to create another Stereo Aux. Input track and instantiate the Pro 52 plug-in on this aux track as well. Then create another MIDI track and select the output as: Digi 001 Pro 52, 2. And so on for more MIDI and Stereo Aux. Input tracks. When the Pro 52 plug-in is instantiated on the Stereo Aux. Input track, the selection for Digi 001 Pro 52 will be available. If the Pro 52 plug-in is not instantiated on a Stereo Aux. Input track, there will not be a choice for the Digi 001 Pro 52 in the output of the MIDI track. [Page View]

OMS Set Up crashing when trying to set up Digi 002.

OMS Set Up crashing when trying to set up Digi 002. OMS may craish if your Digi 002 extensions are not enabled. To solve the problem, make the Digi 002 extensions active in the extension manager. Taken from the Pro Tools LE 5.3.2 Read Me (pg. 2) [Page View]

OMS Test Studio does not function if Soft SampleCell 3.1 is currently ...

OMS Test Studio does not function if Soft SampleCell 3.1 is currently running. To use OMS Test Studio, quit Soft SampleCell first. Taken from the Pro Tools LE 5.3.2 Read Me (pg. 2) [Page View]

Type 2 error when launching Pro Tools 5.x.

Type 2 error when launching Pro Tools 5.x. This can happen if OMS becomes corrupted. Reinstall OMS 2.3.8 from the Pro Tools installer CD and restart the Mac. Then go to System Folder > OMF Folder > OMS Preferences. Find the file "OMS Current State," put it in the trash, empty the trash. If problems persist for Digi 001 users, find the file "Digi001OMSMidiDriver" in System Folder > OMF Folder and temporarily place it on the desktop while attempting to launch Pro Tools LE. [Page View]

Setup for syncing a 24-track analog tape machine to Pro Tools LE via a ...

Setup for syncing a 24-track analog tape machine to Pro Tools LE via a MOTU MTP AV for Mac. 1. The MTPAV will convert SMPTE to MTC (MIDI Time code). 2. Follow MOTU Manual on this setup. On the MTP AV 1. MTPAV clock must be set to internal. 2. Word clock out must be set to 1x. The Digi 001 does Not read Super Clock. 3. The MTPAV's MMC ID must match Pro Tools (#127) FreeMIDI/OMS Studio Setup 1. Install OMS first 2. Install FreeMIDI, Clockworks, & the MTP Express Console (www.motu.com). Launch FreeMIDI and tell it to "use OMS" (or go to the preferences and select "OMS"). 3. Launch OMS and make sure it recognizes the MTP AV as an interface. 4. Branching off the MTP AV create a device and set the correct manufacturer of MTR (Multi Track Recorder) and model. 5. Edit Menu > Preferences and uncheck all four Preferences > OK. 6. File Menu > Save and close OMS. Pro Tools 1. Setups menu to peripherals: - Synchronization: Device is Generic MTC reader, Port is MTPAV - Machine Control: Enable and send to the MTPAV,mdm ID# 127 2. Windows menu: Show Session Setup. Set the sample and frame rates to match the MTR or MTPAV. Current time and session start time should match hours. note: If you do not see "Current Time" then the timing information is not being sent from the MTP AV (check MIDI connections, FreeMIDI/OMS setup, Pro Tools settings or the MTP AV). When changing session start times you must press the enter key to complete the change in hour. If it prompts you to adjust the regions choose "Maintain Relative" position. 3. MIDI menu: Input devices. Ensure that the MTR and/or the MTP AV is checked. 4. Transport window: Put online (Operations menu: Online). The clock will flash blue. 5. Setups Menu: Preferences > Operations. Choose either record at ADAT lock or insertion/selection. 6. Drop the cursor (with the waveform tool) at a location in Pro Tools and press play on the transport window. Pro Tools should go into play mode and begin playback of the MTR. -or- 7. Set (in the transport window) transport=MMC. The transport will now drive the MTR. [Page View]

	Support Search Search	Next