 DAE error -6009 during bounce to disk in Pro Tools LE 5.1 on Win 98 SE. ...
|
| DAE error -6009 during bounce to disk in Pro Tools LE 5.1 on Win 98 SE. |
1) In Setups > Preferences > Operation > Open Ended Record Allocation set Limit to 60 Min.
2) Select Area to be bounced on timeline before bouncing.
[Page View]
|
|
|
I installed Pro Tools LE 5.1 (Mac) and D-Verb asks for key disk authorization. ...
|
| I installed Pro Tools LE 5.1 (Mac) and D-Verb asks for key disk authorization. I only have a serial number. Do I need a key disk? |
No, you don't need a key disk, you need to install the correct version of D-Verb, which uses your D-Verb serial number/authorization code.
Installing Pro Tools LE 5.1 or the D-Verb Plug-In Demo over previous installs of Pro Tools LE will remove your FREE D-Verb Plug-In. To keep your FREE D-Verb Plug-in from being overwritten by the Pro Tools LE 5.1 and D-Verb Demo Installers, remove both the D-Verb and D-Verb AS Plug-Ins from your Plug-Ins folder. Place the plug-ins in a temporary location other than the Pro Tools Plug-Ins folder and outside of your System Folder, such as on your Desktop. The Plug-Ins folder is located in the following directory:System Folder:DAE Folder:Plug-Ins
After removing the D-Verb & D-Verb AS Plug-Ins from the Plug-Ins folder,run the Pro Tools 5.1 LE Installer. Once the Pro Tools 5.1 installation is complete, both the D-Verb and D-Verb AS Plug-Ins can be returned to the Plug-Ins folder. An updated FREE D-Verb Installer for Pro Tools LE users is posted on the Digidesign website in Support/Downloads at:
http://www.digidesign.com/download/dverb.html
Note: If you have already run either the Pro Tools LE 5.1 or D-Verb Demo Installer and fear you have overwritten your FREE D-Verb Plug-Ins,you can still reinstall the FREE D-Verb Plug-In Promotion from the Pro Tools LE 5.0.1 Software CD.
The D-Verb serial number for newly purchased systems is located on the "FREE D-Verb for Pro Tools LE" promotion brightly colored postcard that is included with the system. If you upgraded to Pro Tools LE 5.1 the authorization from D-Verb 1.7 will still be valid for D-Verb 1.8.
Since both the authorization code and the key disk versions of D-Verb 1.8 have the same version number, you can tell them apart by viewing their creation date:
D-Verb 1.8 (authorization code version) has a creation date of Feb 21, 2001.
D-Verb 1.8 (key disk authorization version) has a creation date of Jan 18, 2001.
[Page View]
|
|
|
"The MP3 option cannot be enabled because a program error occurred while ...
|
| "The MP3 option cannot be enabled because a program error occurred while loading mp3.dll" error -2821 |
This is probably the result of an incompatible or corrupted mp3.dll file. Follow these steps to replace it with a fresh copy.
1) Quit Pro Tools. Make sure you have the installer CD for the version of Pro Tools currently in use.
2) Open Macintosh HD > System Folder > DAE Folder > Codecs > MP3. Drag the mp3.dll into the trash. Leave the MP3 folder open.
3) Open Pro Tools Installer CD > DAE Folder > Codecs > MP3. Drag the mp3.dll you see there into the MP3 folder residing on the Macintosh HD.
4) Launch Pro Tools, you should now be able to use MP3 Option free of errors.
[Page View]
|
|
|
DAE error -7219 "The Plug-In could not be made active because a DAE error ...
|
| DAE error -7219 "The Plug-In could not be made active because a DAE error was encountered" when instantiating Hum Removal. |
Hum Removal is not compatible with MIX Hardware and requires a DSP Farm to operate.
Reported via email ID# 53954
[Page View]
|
|
|
"Unable to create DAE Deck" error when launching Pro Tools 5.0.1. PTIII ...
|
| "Unable to create DAE Deck" error when launching Pro Tools 5.0.1. PTIII system (Disk I/O and DSP Farm) in a 2001 model G4 with OS 9.1. |
This is a known incompatibility with DSI 5.0.1. This is fixed in DSI 5.0.1cs8.
[Page View]
|
|
|
DAE error -9161, -9162 and/or -6046 when launching Pro Tools. Another ...
|
| DAE error -9161, -9162 and/or -6046 when launching Pro Tools. Another symptom is that the Macintosh Operating System may be acting very sluggish, i.e. with every command you choose, such as "Open" from the File menu, you get the "tapping fingers" and the OS response is slow and delayed. |
This can be caused by an interface cable not being seated properly, bent pins on the interface cable connectors, or just a bad cable. The audio interface provides a clock for the cards to function, thus a damaged cable can cause -6046, -9161, or -9162 errors.
Try removing and reseating the PCI card. Also, remove the interface cable, check for bent pins, and reseat both sides of the connector, making sure they are not connected upside-down, and that they sit in all the way on both the card and the interface side.
[Page View]
|
|
|
My D-Verb plug-in is not functioning properly after installing Pro Tools ...
|
| My D-Verb plug-in is not functioning properly after installing Pro Tools LE 5.1 Mac. D-Verb asks for a key disk authorization, and I only have a serial number. Do I need a key disk? |
WARNING: FREE D-Verb does not work with Pro Tools FREE.
Installing Pro Tools LE 5.1 or the D-Verb Plug-In Demo over previous installs of Pro Tools LE will remove your FREE D-Verb Plug-In. To keep your FREE D-Verb Plug-in from being overwritten by the Pro Tools LE 5.1 and D-Verb Demo Installers, remove both the D-Verb and D-Verb AS Plug-Ins from your Plug-Ins folder.Place the plug-ins in a temporary location other than the Pro Tools Plug-Ins folder and outside of your System Folder, such as on your Desktop. The Plug-Ins folder is located in the following directory:System Folder:DAE Folder:Plug-Ins
After removing the D-Verb & D-Verb AS Plug-Ins from the Plug-Ins folder,run the Pro Tools 5.1 LE Installer. Once the Pro Tools 5.1 installation is complete, both the D-Verb and D-Verb AS Plug-Ins can be returned to the Plug-Ins folder. An updated FREE D-Verb Installer for Pro Tools LE users is posted on the Digidesign website in Support/Downloads at http://www.digidesign.com/download
Note: If you have already run either the Pro Tools LE 5.1 or D-Verb Demo Installer and fear you have overwritten your FREE D-Verb Plug-Ins,you can still reinstall the FREE D-Verb Plug-In Promotion from the Pro Tools LE 5.0.1 Software CD.
If you continue to have problems with your D-Verb authorization, download D-Verb v1.8.1 from http://www.digidesign.com/download/dverb. This version of D-Verb (v1.8.1) does not require authorization.
[Page View]
|
|
|
Attempting to Bounce to Disk with an MP3 conversion using MP3 Option results ...
|
| Attempting to Bounce to Disk with an MP3 conversion using MP3 Option results in an error type -2802. |
This is probably the result of an incompatible or corrupted mp3.dll file. Follow these steps to replace it with a fresh copy.
1) Quit Pro Tools. Make sure you have the installer CD for the version of Pro Tools currently in use.
2) Open Macintosh HD > System Folder > DAE Folder > Codecs > MP3. Drag the mp3.dll into the trash. Leave the MP3 folder open.
3) Open Pro Tools Installer CD > DAE Folder > Codecs > MP3. Drag the mp3.dll you see there into the MP3 folder residing on the Macintosh HD.
4) Launch Pro Tools, you should be able to use MP3 Option free of errors now.
MP3.dll 1.1 is also available for download from http://www.digidesign.com/download/mp3
[Page View]
|
|
|
DAE error -11 when launching Pro Tools 5.1.
|
| DAE error -11 when launching Pro Tools 5.1. |
Happens when you are using Peak 2.53 or earlier software via the DAE. When you quit out of Peak and then try to launch Pro Tools you will get this error. You must reboot the computer and then you can launch Pro Tools.
Peak is aware of the problem and will be posting
an update to Peak, version 2.5.4 that should fix
this problem.
www.bias-inc.com
[Page View]
|
|
|
How can I run Pro Tools 5.0 and PostConform 2.0 at the same time?
|
| How can I run Pro Tools 5.0 and PostConform 2.0 at the same time? |
Use DAE 5.0p.
[Page View]
|
|
|
