 DAE error -9035 when trying to playback or record audio. This can happen ...
|
| DAE error -9035 when trying to playback or record audio. This can happen if importing audio files or renaming audio files. This can also happen after creating fade files or performing Edit Smoothing in Beat Detective on Pro Tools 6.x. |
This error message will appear if a Pro Tools session has more than 31 characters for the name in the American OS (or more than 15 characters in the Japanese OS).
Also could be caused by using illegal characters ^ ! < > / ( ) - ;
or international characters from other languages (any characters in the Extended ASCII set. example é à).
Workaround:
Rename the session with 31 or less characters in American Mac Operating system.
Rename the session with 15 or less Japanese characters in Japanese Mac Operating System.
From the Pro Tools TDM 6.0 and 6.0.1 ReadMe.
[Page View]
|
|
|
DAE error -9735 occurs when trying to play a file placed past the 810 ...
|
| DAE error -9735 occurs when trying to play a file placed past the 810 minute mark on a track in Pro Tools 6.0. |
This error will come up when you reach the maximum session length for the sample rate being used in the session. At 48k the max session length is about 12 hours, at 96K about 6 hours and at 192k, 3 hours is the maximum session length.
[Page View]
|
|
|
Why does opening the Import Audio dialog take so long in Pro Tools 5.x? ...
|
| Why does opening the Import Audio dialog take so long in Pro Tools 5.x? |
It's likely that the problem is due to memory fragmentation in the OS. Especially if you don't have a lot of RAM and have had the machine running (without a reboot) for a long time. When opening the Import Audio Dialog, Pro Tools needs to go into a different "mode" than when running with the regular DAE deck. Transitioning between these modes allocates and releases large amounts of memory. In the process, memory can get fragmented and, when Pro Tools attempts to return to "DAE" mode, the OS can take a while (or even fail) to recover the original memory.
So, how can I get around this?
1. Add more RAM to your system and allocate more to DAE by increasing the preferred size. This will make it easier for the Pro Tools to allocate memory when returning to DAE mode -- especially when running decks with large (>64) voice counts.
2. Reboot. OS9 doesn't always do a good job of recovering from fragmented memory situations and a reboot is sometimes the easiest cure for the problem.
This shouldn't be a problem on Windows or OSX because we do some pre-allocation/caching that holds-on to memory when going to the Import Audio dialog.
It has also been reported by several users that having Waves plug-ins installed will make this operation considerably slower.
[Page View]
|
|
|
"Not enough memory available to run DAE" or "Pro Tools requires XXXXXk, ...
|
| "Not enough memory available to run DAE" or "Pro Tools requires XXXXXk, but there is only 0k available" at Pro Tools launch. |
Check Pro Tools minimum and preferred memory settings.
Check total installed RAM.
In one case, this was resolved by reinstalling the operating system.
[Page View]
|
|
|
Getting type 2 or type 3 error message after installing Waves Gold Bundle ...
|
| Getting type 2 or type 3 error message after installing Waves Gold Bundle after having installed the Waves Renaissance Collection that comes on Digi 002 pack CD. |
Solution is to completely uninstall all elements of Waves plug-ins. Drag to the trash all elements and restart computer before launching Pro Tools LE.
Where to find all elements of Waves plug-ins:
1) Mac Hard Drive. Drag all Waves folders to trash.
2) Mac Hard Drive > System Folder > Extensions folder. Drag WaveLib extension to trash.
3) Mac Hard Drive > System Folder > DAE folder > Plug-ins folder. Drag all Waveshells to trash.
4) Mac Hard Drive > System Folder > Preferences folder. Drag Waves preference to trash.
5) Empty trash. Restart computer.
6) Launch Pro Tools LE. All should be fine.
7) Reinstall the Waves Renaissance Collection plug-ins, located on the "Digi 002 pack version 1.0." installation CD.
[Page View]
|
|
|
DAE error -199 (and type 12 error) when launching Pro Tools. Pro Tools ...
|
| DAE error -199 (and type 12 error) when launching Pro Tools. Pro Tools disappears and goes back to the desktop and freezes computer. |
One customer was able to solve the issue by installing the Audiomedia III card in the second PCI slot below the AGP graphics card.
[Page View]
|
|
|
When I try to import a track from an audio CD on a Windows XP computer ...
|
| When I try to import a track from an audio CD on a Windows XP computer using Import Audio From Other Movie, I get an error message: "QuickTime could not import this file." |
Pro Tools on Windows XP PC's cannot extract audio from CD's to import into Pro Tools using the Movie Menu's Import Audio From Other Movie.
This is a Mac only feature.
[Page View]
|
|
|
My eMac crashes during boot while loading DigiSystem Init with my Mbox. ...
|
| My eMac crashes during boot while loading DigiSystem Init with my Mbox. |
make sure you are booting from a OS 9.x system folder, and you are not booting in OS X
trash DigiSetup
trash Pro Tools LE preferences
trash DAE prefs (entire folder)
empty trash and reboot.
at the time of this writing, eMac Macintosh models have not been tested or qualified for use with MBox.
For a list qualified Macintosh models and options, see http://www.digidesign.com/compato/mboxmac.cfm
[Page View]
|
|
|
Error messages to increase/decrease HW buffer size.
|
| Error messages to increase/decrease HW buffer size. |
In one case, swapping the Intel Ultra ATA storage controller for the Standard Dual PCI IDE controller resolved this error.
Update the driver through Device Manager>IDE/ATA ATAPI Controllers>properties on ATA controller.
[Page View]
|
|
|
"Unable to create DAE deck" on launch of Pro Tools.
|
| "Unable to create DAE deck" on launch of Pro Tools. |
The following chassis, shipped after January 2002, did not recognize Pro Tools|24 MIX cards when installed.
* Digidesign 7-slot chassis
* SBS 7-slot chassis
* SBS 13-slot chassis
DigiSystem INIT 5.1.3cs5 resolves this issue. It can be downloaded from the Digidesign website at: http://www.digidesign.com/download/daedsi
[Page View]
|
|
|
