 After updating to Pro Tools 5.3.1 for HD (Macintosh version), several ...
|
| After updating to Pro Tools 5.3.1 for HD (Macintosh version), several plug-ins won't see the iLok authorization key: Focusrite d2, Maxim, and the D-Fi Bundle (LoFi, RectiFi, SciFi, and VariFi). |
The original iLok authorized versions of these plug-ins should still be located in: Macintosh HD > Obsoleted Digidesign Software folder > DAE Folder > Plugins folder.
Move these copies of the plug-ins back into the main plug-ins folder: Macintosh HD > System Folder > DAE Folder > Plug-Ins folder
Alternately, you can choose to reinstall these plug-ins from the HD|Pack Installer, but you must first remove the newer versions from the Plug-Ins folder, otherwise you will end up with duplicate versions of these plug-ins (and Pro Tools will still load the floppy authorized versions only).
Note that the initial posting of the Pro Tools 5.3.1 TDM updater for Mac installed DINR plug-ins that needed to be replaced using the process described above. The 6/19/2002 posting of the installer instals the iLok authorized version of DINR and does not cause the issue described above.
[Page View]
|
|
|
Post fader metering still shows balanced levels while both sides are panned ...
|
| Post fader metering still shows balanced levels while both sides are panned hard left. |
This is a bug in Pro Tools TDM. Current versions of Pro Tools with this bug include:
5.1.3
5.2
5.3
5.3.1
[Page View]
|
|
|
After updating to Pro Tools 5.3.1 for HD (Macintosh version), DPP-1 won't ...
|
| After updating to Pro Tools 5.3.1 for HD (Macintosh version), DPP-1 won't see the text serial number authorization that was previously entered. |
The original serial number authorized version of this plug-in should still be located in: Macintosh HD > Obsoleted Digidesign Software folder > DAE Folder > Plugins folder.
Move this copy of the plug-in back into the main plug-ins folder: Macintosh HD > System Folder > DAE Folder > Plug-Ins folder.
Alternately, you can choose to reinstall this plug-in from the HDpack CD Installer, but you must first remove the newer version from the Plug-Ins folder, otherwise you will end up with duplicate versions of this plug-in (and Pro Tools will still load the floppy authorized versions only).
[Page View]
|
|
|
Sluggish performance when running Pro Tools|HD (Pro Tools TDM v5.3)
|
| Sluggish performance when running Pro Tools|HD (Pro Tools TDM v5.3) |
Upgrading to Waves v3.5 resolved the issue.
[Page View]
|
|
|
When launching Pro Tools|HD software (v5.3), the following error message ...
|
| When launching Pro Tools|HD software (v5.3), the following error message is posted: "Pro Tools for TDM requires a TDM Mixer Plug-in in the Plug-ins folder" |
Installing Pro Tools software onto the same hard drive volume/partition as the System Folder resolved the error.
[Page View]
|
|
|
Although not consistent, it appears that one or more of my 192 I/O's does ...
|
| Although not consistent, it appears that one or more of my 192 I/O's does not initialize properly. I can tell this when the Sync and Sample Rate lights don't come on. Pro Tools will not recognize the interfaces and I am forced to restart the computer to get things to work. |
Allowing the chassis to warm up for 30 seconds or more BEFORE powering on the interfaces seems to have solved this problem for one customer.
This behavior has only been seen when using a PCI expansion chassis.
[Page View]
|
|
|
When going into the Import Audio dialog, Pro Tools 5.3 quits to the desktop ...
|
| When going into the Import Audio dialog, Pro Tools 5.3 quits to the desktop with the message: "1C Gershwin Waves DSP: read exec wait for host status bit set (konyxtrdy mask 2) failed". |
Verify if you are using Pro Tools|HD compatible version of Waves Plug-ins, and make sure you are using the latest version of these plug-ins.
[Page View]
|
|
|
Why does the system usage window show stream manager usage when either ...
|
| Why does the system usage window show stream manager usage when either Long Delay II or Extra Long Delay II are instantiated. |
In Pro Tools 5.3 and higher, Long Delay and Extra Long Delay use the HTDM technology which utilizes the Digidesign Stream Manager.
To learn more about HTDM go to: http://www.digidesign.com/support/faq/htdm.html
[Page View]
|
|
|
After installing my Pro Tools|HD cards (HD Core and HD Process), my computer ...
|
| After installing my Pro Tools|HD cards (HD Core and HD Process), my computer (G4 AGP 933MHz) refuses to boot. The power light goes on but nothing else (no Mac chime or monitor activity) |
In two cases, resetting the motherboard solved this problem.
The button to reset the motherboard is located near the battery. Hold it down for at least 5 seconds to perform a complete reset.
[Page View]
|
|
|
Is my Digidesign 13 slot chassis compatible with my Pro Tools|HD cards? ...
|
| Is my Digidesign 13 slot chassis compatible with my Pro Tools|HD cards? |
The original Digi 13-slot chassis (the one with the big ribbon cable) is not supported because the cards need to be installed in reverse order (right to left) and the TDM flex cable needs to make a severe bend that would compromise its integrity.
Pro Tools|HD Incompatible Models S/N = NB055300B1 or lower
Pro Tools|HD Compatible Models, the S/N begins with NB0600100C
[Page View]
|
|
|
