 Changing settings on legacy peripherals on sessions with sample rates ...
|
| Changing settings on legacy peripherals on sessions with sample rates higher than 48 kHz. |
In some hardware configurations after using Pro Tools at sample rates higher than 48 kHz, some legacy peripherals may not be identified and peripherals settings won't be modifiable in the Hardware Setup dialog, although such peripherals can be used in the session. If this occurs, un-declare legacy peripherals in the Hardware Setup dialog and declare them again.
Taken from the "Read Me" for Pro Tools HD 7.0 - 7.4.2 for Windows XP & Mac OS X.
[Page View]
|
|
|
What controller personality profile does the Yamaha Motiff 8 use for transport ...
|
| What controller personality profile does the Yamaha Motiff 8 use for transport control within Pro Tools' peripherals, MIDI controllers option? |
The Motiff 8 uses the CS-10, a legacy controller. For those using Pro Tools v6.4 or higher it may be necessary to download these legacy controller from our website.
www.digidesign.com/download/controllers
Once the controller file is downloaded, you must manually install into the following locations:
Mac OS X:
Mac HD > Applications > Digidesign > Pro Tools > Controllers.
Windows XP:
My Computer > Local Disc (C:) > Program Files > Common Files > DAE > Controllers.
[Page View]
|
|
|
DAE Errors 9092, 9093, or 9094, 9129 on Windows XP systems with dual core ...
|
| DAE Errors 9092, 9093, or 9094, 9129 on Windows XP systems with dual core processors. |
These errors can be caused by problems with processor scheduling in dual core processors. The solution is to assign Pro Tools to run on a specific processor core.
To do this:
1. Launch Pro Tools, but do not create or open a session.
2. Right click on the Task Bar and select 'Task Manager'.
3. Click on the Processes tab, then right-click on ProToolsLE.exe and select 'Set Affinity' from the drop down menu.
4. Uncheck the box for CPU 0.
5. Click OK and close the Task Manager.
You will have to do this each time you launch Pro Tools unless you use and application like THG Task Assignment Tool.
More info on the THG Task Assignment Tool can be found here:
http://www6.tomshardware.com/cpu/20040528/index.html
[Page View]
|
|
|
DAE error -6088 during record or playback in Pro Tools on Windows XP.
|
| DAE error -6088 during record or playback in Pro Tools on Windows XP. |
in one case, exchanging the firewire cable resolved the problem
[Page View]
|
|
|
DAE error -6088 during record or playback in Pro Tools on Windows XP.
|
| DAE error -6088 during record or playback in Pro Tools on Windows XP. |
This has been seen on systems running Pro Tools v6.7 or later without Windows Service Pack 2 installed. Service Pack 2 is required to run Pro Tools v6.7 or higher.
Updating to Windows Service Pack 2 may help with this issue.
[Page View]
|
|
|
PRO TOOLS TIP: Using DigiBase to Manage Media Files and Session Information ...
|
| PRO TOOLS TIP: Using DigiBase to Manage Media Files and Session Information & Making Sure Pro Tools Recognizes Your Hard Drives |
From the the DigiZine Winter 2005 Edition, Technically Speaking.
Find out from one of Digidesign's Tech Support specialists how to use DigiBase to manage your files and designate your hard driives for use with Pro Tools.
[click here for more]
DigiZine Winter 2005 Edition
Workshop
Technically Speaking
Thom Loftus answers the following questions:
-How to make sure Pro Tools recognizes your hard drives using DigiBase
Note: Digidesign now recommends formatting drives in Mac OS X as the following:
Mac OS Extended (Journaled)
To read current and past issues of DigiZine, see the following section of the Digidesign website:
DigiZine
[Page View]
|
|
|
DAE error -7401 when instantiating RTAS plug-ins or sometimes when opening ...
|
| DAE error -7401 when instantiating RTAS plug-ins or sometimes when opening a session that contains RTAS plug-ins or instruments. |
Updating to the most current PACE drivers may fix the problem.
- Go to www.paceap.com
- Click on Drivers tab
- Click on Downloads tab
- Download latest Interlok driver for your Operating System
- Run the Interlok installer
[Page View]
|
|
|
DAE error -1 when launching Pro Tools on Win XP. Digitest fails.
|
| DAE error -1 when launching Pro Tools on Win XP. Digitest fails. |
In one case, this turned out to be caused by a bad PCI slot in an HP XW8000. The HD Core would work when placed in the CPU, but not in the expansion chassis. Moving the expansion chassis host card from slot 4 to slot 5 in the CPU solved the problem.
[Page View]
|
|
|
DAE -9019 error after installing new hard drive.
|
| DAE -9019 error after installing new hard drive. |
A new hard disk is on some Windows XP systems, by default, formatted with the option "compress data on hard disk".
Verify that this is disabled in the preferences of each partition.
[Page View]
|
|
|
DAE error -6088 during record or playback in Pro Tools on Windows XP.
|
| DAE error -6088 during record or playback in Pro Tools on Windows XP. |
Disabling all networking or wireless cards on your system from the Device Manager should resolve this error.
1) Click on the 'Start' menu, right-click on 'My Computer' and select 'Properties' from the drop-down list.
2) In the System Properties window, click on the 'Hardware' tab, then on the button for 'Device Manager'.
3) In the Device Manager window, click on the '+' sign next to 'Network Adapters' to open the tab.
4) Right-click on any network or wireless devices listed and select 'disable' from the drop-down list.
[Page View]
|
|
|
