 "TDM transmission fails, can't find TDM monitor card" error after running ...
|
| "TDM transmission fails, can't find TDM monitor card" error after running DigiTest. |
Verify that the DigiSystem INIT and DAE are installed.
[Page View]
|
|
|
DAE/DSI 3.4.2 for Blue & White G3s
|
| DAE/DSI 3.4.2 for Blue & White G3s |
If you are using Digidesign hardware on a Blue and White G3 with a third-party application and experiencing problems, download the new version of DAE/DSI. Contact the third-party manufacturer of your software regarding compatibility and software issues. (In order to use this DAE/DSI with Pro Tools software, you will need Pro Tools software version 4.3.1, which installs it automatically)
Download Software at http://www.digidesign.com/download/daedsi
[Page View]
|
|
|
DAE error 7452 in the Gain Audio Suite Plug-In when trying to use "find ...
|
| DAE error 7452 in the Gain Audio Suite Plug-In when trying to use "find peak." |
This is a problem that occurs in the Gain Plug-In version 1.3.1. It is triggered by setting the Plug-In to "overwrite files" and then pressing the process button. If you cancel when it asks you if you want to do a destructive process, this error will come up the next time you hit "find peak".
To reset the Plug-In, switch to another Plug-In and then back again.
[Page View]
|
|
|
"Not enough memory to complete overview. Waveform will only draw when ...
|
| "Not enough memory to complete overview. Waveform will only draw when zoomed in." error when launching Pro Tools. |
- Verify DAE Buffer setting for particular card(s) used. Try recommended default settings first.
- Increase Preferred memory allocation of the Pro Tools application in the Get Info window.
[Page View]
|
|
|
"The maximum number of virtual tracks allowed by the DAE has been exceeded. ...
|
| "The maximum number of virtual tracks allowed by the DAE has been exceeded. DAE supports 43 tracks on your HW, so if you have more tracks than this, they will not be enabled for playback or recording." when creating new tracks in Digital Performer. |
The virtual track limit within Digital Performer (as of 2.43) is 43 tracks.
Pro Tools and a Mix Plus system has a virtual track limit of 86.
The user who encountered these error messages had the following configuration. Digital performer 2.43, 256MB RAM
MIX Plus, 888/24, 888/24, DAE/DSI v3.4
[Page View]
|
|
|
DAE Error -9023
|
| DAE Error -9023 |
Corrupted sound file:
1. Went to the session and played it track by track
2. Also, saw that the waveform on the corrupted track had "vertical" lines
3. Removed corrupted track via TrackTransfer
4. -9023 error went away
[Page View]
|
|
|
DAE error -7157 when opening the Pitch Shift AudioSuite Plug-In.
|
| DAE error -7157 when opening the Pitch Shift AudioSuite Plug-In. |
This is a problem with the Time Compression/Pitch Shift Plug-In version 1.3.1 which shipped with Pro Tools 4.3.1.
It turns out that the 7157 occurs only after creating a user-defined default setting for the Time Compression/Expansion Plug-In. Resetting this back to the factory default preset setting will make the 7157 errors go away.
[Page View]
|
|
|
"Test is disabled because no Digidesign card exists" when running DigiTest. ...
|
| "Test is disabled because no Digidesign card exists" when running DigiTest. |
DigiSetup somehow gets placed at the root level of the system folder (just after the DAE folder).
Trash all prefs and restart.
The user was trying to install an AM3 card with Pro Tools 4.2 and DAE/DSI 3.3.
[Page View]
|
|
|
DAE error -42 when launching PT 4.x
|
| DAE error -42 when launching PT 4.x |
DAE error -42 found while one user had Virex enabled. Rebooting with Virex turned off resolved this problem.
[Page View]
|
|
|
DAE error -108 during authorization (not enough memory) then DAE crashes... ...
|
| DAE error -108 during authorization (not enough memory) then DAE crashes... type 15 errors during Pro Tools 4.3.1 install |
Application memory minimum size set to greater than factory default.
Set app memory minimum sizes to factory default: quit app, highlight app icon, get info (command-I) go to memory settings, highlight number in MINIMUM and type zero and hit return. Do same for DAE.
[Page View]
|
|
|
