DAE error -6046

DAE error -6046 This error will occur when hot swapping an audio interface with ProTools launched. Might need to trash prefs. this happened with Pro Tools 5.0 with an 888 [Page View]

What does DIGIMIDI.dll do and where does it reside

What does DIGIMIDI.dll do and where does it reside DigiMIDI.dll handles the kinds of things that OMS takes care of on the Macintosh. It should be installed along with Pro Tools in the appropriate place, which would be in the same directory as other Digi DLLs like DAE.dll. [Page View]

"Unable to create a DAE deck" while launching Pro Tools LE 5.0.

"Unable to create a DAE deck" while launching Pro Tools LE 5.0. - Verify that the Digi 001 card is firmly seated in the PCI slot (it can easily pop out when snapping on the I/O connector cable if the user has not screwed in the card). - Verify that the I/O cable is seated at both the card and Interface. The red ADAT optical OUTPUT light (ADAT light pipe) gets its power from the PCI slot. If the card is not firmly seated, it will NOT be lit. Running DigiTest verified that the card was not present. DigiTest did not see any card in the PCI slot but did see a SCII card (that was seated correctly). Also , as a quick check, if the card is seated correctly, the little red ADAT optical OUTPUT light will be lit. [Page View]

DAE error -1113, when trying to open Audiosuite plug-ins in NT based Avid ...

DAE error -1113, when trying to open Audiosuite plug-ins in NT based Avid Media Composer products. To use Audiosuite on NT you need to be logged in as an Administrator. This is the same error posted when launching Pro Tools on NT when not logged in as an Administrator. [Page View]

While attempting to bounce a session geterror message:Could not complete ...

While attempting to bounce a session geterror message:Could not complete "bounce to disk" command because of a program error - verify DAE Buffer = 2 - verify minimum memory allocation of Pro Tools and DAE is at default. - verify Disk Cache = 512 - trash preferences - Allocate more preferred RAM to DAE and Pro Tools The user encountering this error message had Pro Tools' minimum memory allocation set to 32000 and the Disk Cache set to 6144. After trashing prefs he was able to bounce the session. [Page View]

"DAE Memory is Low" error while launching Pro Tools.

"DAE Memory is Low" error while launching Pro Tools. - Verify Memory Allocation in Pro Tools - Verify Memory Allocation in DAE - Verify Memory Allocation in Pro Tools & DAE does not exceed System RAM - Verify Disk Cache (Memory Control Panel) is 512k or lower - Verify Virtual Memory is off (Memory Control Panel) - Verify DAE Playback Buffer Size is correct for appropriate Playback Engine Customer had DAE Playback Buffer Size at 8 & Disk Cache at the "Default" of 8160k [Page View]

Digidesign and Waves Announce Interim Releases of DAE and Waveshell

Digidesign and Waves Announce Interim Releases of DAE and Waveshell September 3, 1999 Digidesign and Waves are pleased to announce the release of Digidesign DAE version 3.4.2 f9 and ks Waves Waveshell version 2.8. These are interim releases of these products that are the result of intensive cooperation between these two partners. Working together, DAE 3.4.2 f9 and Waveshell 2.8 will address DSP memory management problems that users of Pro Tools|24 MIX and Waves TDM Plug-Ins have been experiencing. Specifically, this dual intermediate release will address the DAE memory overflow that may occur, typically in larger Pro Tools Sessions in which many Plug-Ins are instantiated, when a session is closed and reopened and DSP memory shuffling is performed. Both companies note that these interim releases are made to address this problem specifically, and that not all compatibility issues between Digidesign and Waves products will be addressed by this release. "The partnership between Digidesign and Waves is essential, since the Waveshell and Waves TDM Plug-Ins are a Development Partner solution of choice for so many Pro Tools Users," says Ed Gray, Manager of Digidesign's Developer Program. "It's gratifying to see Digidesign and Waves work to diagnose what proved to be a complex technical issue, and to quickly solicit testing and feedback from our mutual users." Orly Nesher, Director of Sales & Marketing at Waves added, "We are very happy to be offering this interim release of Waveshell along with DAE and know it will be immediately useful to an important group of our key mutual customers. We look forward to cooperating with Digidesign as our two high-end product lines continue to evolve and improve." More Details and DOWNLOAD at http://www.digidesign.com/download/daedsi Waveshell 2.8 and their TDM updaters are available at http://www.waves.com Note: When changing DAE/Waves versions, always trash the DAE Prefs folder (System Folder/Preferences) and the WaveShell-DAE Preferences file. (System Folder/Preferences/Waves Preferences) [Page View]

Release dates and versions for DSP Manager.

Release dates and versions for DSP Manager. The DSP Manager is library file used by Pro Tools and and most 3rd party digital audio sequencers that utilize DAE. 09/17/98 version 1.0 (for Pro Tools 4.3, DAE/DSI 3.4 and 3.41) 04/05/99 version 1.01 (for Pro Tools 4.3.1 an 4.3.2, DAE/DSI 3.42) 11/19/99 version 1.1 (for PT/DAE/DSI 5.0) 05/30/00 version 1.1.1 (for PT 5.0.1) 01/26/01 version 5.1 (for PT 5.1) 01/17/02 version 5.3 (for PT 5.3) [Page View]

SampleCell II Plus with Blue & White G3s:

SampleCell II Plus with Blue & White G3s: If you are using SampleCell II Plus on a new Blue and White G3 and are experiencing installation problems, please download DigiTest 3.3.0 and the DAE/DSI 3.4.2 installer. Download DAE/DSI 3.4.2 from the Software Section at http://www.digidesign.com/download/daedsi Download DigiTest 3.3.0 from the Software Section at http://www.digidesign.com/download/digitest [Page View]

Multiple DigiSystem INIT error when booting the Mac.

Multiple DigiSystem INIT error when booting the Mac. - Multiple copies of the DSI in System Folder/Extensions. - Too many devices or drivers. Remove a drive, or plug-in USB Devices after booting the Mac. - INIT conflict between DSI 3.4.2 and the MiroMotion 1.2 extensions. Re-name each of the seven MiroMotion extensions so that they load before the DSI by adding a dash (-) before the first character of the filename for each extension. HARDWARE: Blue G3/450 12 GB internal IDE drive OS 8.6 Magma 7-slot chassis (G3 slot 0) Mix Plus (chassis slots 1 &2) Pinnacle MiroMotion DC-30 Plus (G3 slot 1) ATTO Dual Channel Express PCI with 9-gig Glyphs on each port, a Glyph CD-ROM daisy chained off one of them (G3 slot 2) 2nd Keyboard and Monitor on Gefen Systems' extension SOFTWARE: Mac OS 8.6 Base Set of extensions PT 4.3.2 DSI/DAE 3.4.2 USB Floppy Enabler 1.3 USB SuperDisk & UT Drivers 1.31 USB Midiport 32 driver (Opcode, version unknown) MiroMotion DC30P INIT 1.2 MiroMotion DC30P LIB 1.2 MiroMotion DC30P Audio In 1.2 MiroMotion DC30P Audio Out 1.2 MiroMotion DC30P Driver 1.2 MiroMotion DC30P DriverA 1.2 MiroMotion DC30P QT 1.2 Open Music System 2.3.7 [Page View]

Prev	Support Search Search	Next