 "DAE Memory is Low" error while launching Pro Tools.
|
| "DAE Memory is Low" error while launching Pro Tools. |
- Verify Memory Allocation in Pro Tools
- Verify Memory Allocation in DAE
- Verify Memory Allocation in Pro Tools & DAE does not exceed System RAM
- Verify Disk Cache (Memory Control Panel) is 512k or lower
- Verify Virtual Memory is off (Memory Control Panel)
- Verify DAE Playback Buffer Size is correct for appropriate Playback Engine
Customer had DAE Playback Buffer Size at 8 & Disk Cache at the "Default" of 8160k
[Page View]
|
|
|
Digidesign and Waves Announce Interim Releases of DAE and Waveshell
|
| Digidesign and Waves Announce Interim Releases of DAE and Waveshell |
September 3, 1999
Digidesign and Waves are pleased to announce the release of Digidesign DAE version 3.4.2 f9 and ks Waves Waveshell version 2.8. These are interim releases of these products that are the result of intensive cooperation between these two partners. Working together, DAE 3.4.2 f9 and Waveshell 2.8 will address DSP memory management problems that users of Pro Tools|24 MIX and Waves TDM Plug-Ins have been experiencing. Specifically, this dual intermediate release will address the DAE memory overflow that may occur, typically in larger Pro Tools Sessions in which many Plug-Ins are instantiated, when a session is closed and reopened and DSP memory shuffling is performed. Both companies note that these interim releases are made to address this problem specifically, and that not all compatibility issues between Digidesign and Waves products will be addressed by this release.
"The partnership between Digidesign and Waves is essential, since the Waveshell and Waves TDM Plug-Ins are a Development Partner solution of choice for so many Pro Tools Users," says Ed Gray, Manager of Digidesign's Developer Program. "It's gratifying to see Digidesign and Waves work to diagnose what proved to be a complex technical issue, and to quickly solicit testing and feedback from our mutual users." Orly Nesher, Director of Sales & Marketing at Waves added, "We are very happy to be offering this interim release of Waveshell along with DAE and know it will be immediately useful to an important group of our key mutual customers. We look forward to cooperating with Digidesign as our two high-end product lines continue to evolve and improve."
More Details and DOWNLOAD at
http://www.digidesign.com/download/daedsi
Waveshell 2.8 and their TDM updaters are available at http://www.waves.com
Note: When changing DAE/Waves versions, always trash the DAE Prefs folder (System Folder/Preferences) and the WaveShell-DAE Preferences file. (System Folder/Preferences/Waves Preferences)
[Page View]
|
|
|
Release dates and versions for DSP Manager.
|
| Release dates and versions for DSP Manager. |
The DSP Manager is library file used by Pro Tools and and most 3rd party digital audio sequencers that utilize DAE.
09/17/98 version 1.0 (for Pro Tools 4.3, DAE/DSI 3.4 and 3.41)
04/05/99 version 1.01 (for Pro Tools 4.3.1 an 4.3.2, DAE/DSI 3.42)
11/19/99 version 1.1 (for PT/DAE/DSI 5.0)
05/30/00 version 1.1.1 (for PT 5.0.1)
01/26/01 version 5.1 (for PT 5.1)
01/17/02 version 5.3 (for PT 5.3)
[Page View]
|
|
|
SampleCell II Plus with Blue & White G3s:
|
| SampleCell II Plus with Blue & White G3s: |
If you are using SampleCell II Plus on a new Blue and White G3 and are experiencing installation problems, please download DigiTest 3.3.0 and the DAE/DSI 3.4.2 installer.
Download DAE/DSI 3.4.2 from the Software Section at
http://www.digidesign.com/download/daedsi
Download DigiTest 3.3.0 from the Software Section at
http://www.digidesign.com/download/digitest
[Page View]
|
|
|
Multiple DigiSystem INIT error when booting the Mac.
|
| Multiple DigiSystem INIT error when booting the Mac. |
- Multiple copies of the DSI in System Folder/Extensions.
- Too many devices or drivers. Remove a drive, or plug-in USB Devices after booting the Mac.
- INIT conflict between DSI 3.4.2 and the MiroMotion 1.2 extensions. Re-name each of the seven MiroMotion extensions so that they load before the DSI by adding a dash (-) before the first character of the filename for each extension.
HARDWARE:
Blue G3/450
12 GB internal IDE drive
OS 8.6
Magma 7-slot chassis (G3 slot 0)
Mix Plus (chassis slots 1 &2)
Pinnacle MiroMotion DC-30 Plus (G3 slot 1)
ATTO Dual Channel Express PCI with 9-gig Glyphs on each port, a Glyph CD-ROM daisy chained off one of them (G3 slot 2)
2nd Keyboard and Monitor on Gefen Systems' extension
SOFTWARE:
Mac OS 8.6 Base Set of extensions
PT 4.3.2
DSI/DAE 3.4.2
USB Floppy Enabler 1.3
USB SuperDisk & UT Drivers 1.31
USB Midiport 32 driver (Opcode, version unknown)
MiroMotion DC30P INIT 1.2
MiroMotion DC30P LIB 1.2
MiroMotion DC30P Audio In 1.2
MiroMotion DC30P Audio Out 1.2
MiroMotion DC30P Driver 1.2
MiroMotion DC30P DriverA 1.2
MiroMotion DC30P QT 1.2
Open Music System 2.3.7
[Page View]
|
|
|
"TDM transmission fails, can't find TDM monitor card" error after running ...
|
| "TDM transmission fails, can't find TDM monitor card" error after running DigiTest. |
Verify that the DigiSystem INIT and DAE are installed.
[Page View]
|
|
|
DAE/DSI 3.4.2 for Blue & White G3s
|
| DAE/DSI 3.4.2 for Blue & White G3s |
If you are using Digidesign hardware on a Blue and White G3 with a third-party application and experiencing problems, download the new version of DAE/DSI. Contact the third-party manufacturer of your software regarding compatibility and software issues. (In order to use this DAE/DSI with Pro Tools software, you will need Pro Tools software version 4.3.1, which installs it automatically)
Download Software at http://www.digidesign.com/download/daedsi
[Page View]
|
|
|
DAE error 7452 in the Gain Audio Suite Plug-In when trying to use "find ...
|
| DAE error 7452 in the Gain Audio Suite Plug-In when trying to use "find peak." |
This is a problem that occurs in the Gain Plug-In version 1.3.1. It is triggered by setting the Plug-In to "overwrite files" and then pressing the process button. If you cancel when it asks you if you want to do a destructive process, this error will come up the next time you hit "find peak".
To reset the Plug-In, switch to another Plug-In and then back again.
[Page View]
|
|
|
"Not enough memory to complete overview. Waveform will only draw when ...
|
| "Not enough memory to complete overview. Waveform will only draw when zoomed in." error when launching Pro Tools. |
- Verify DAE Buffer setting for particular card(s) used. Try recommended default settings first.
- Increase Preferred memory allocation of the Pro Tools application in the Get Info window.
[Page View]
|
|
|
"The maximum number of virtual tracks allowed by the DAE has been exceeded. ...
|
| "The maximum number of virtual tracks allowed by the DAE has been exceeded. DAE supports 43 tracks on your HW, so if you have more tracks than this, they will not be enabled for playback or recording." when creating new tracks in Digital Performer. |
The virtual track limit within Digital Performer (as of 2.43) is 43 tracks.
Pro Tools and a Mix Plus system has a virtual track limit of 86.
The user who encountered these error messages had the following configuration. Digital performer 2.43, 256MB RAM
MIX Plus, 888/24, 888/24, DAE/DSI v3.4
[Page View]
|
|
|
