 when launching Pro Tools, Pro Tools hangs at "Initializing TDM"
|
| when launching Pro Tools, Pro Tools hangs at "Initializing TDM" |
reboot your system and delete the Preferences from the system's preferences folder.
- DigiSetup
- (entire folder) DAE Prefs
- Pro Tools vX.X prefences
This can occur if you relaunch Pro Tools too quickly after shutting down. You should wait until disk activity has stopped (or wait a few seconds) after quitting Pro Tools, before relaunching Pro Tools.
One of the last thing Pro Tools does when quitting, is to SAVE the preferences. If you (re-)launch Pro Tools, one of the first things it will do is READ these preferences. If these two processes occur simultaneously, the system will not allow either process to complete.
[Page View]
|
|
|
DAE error -9128 when trying to use D-Verb plug-in even though my CPU should ...
|
| DAE error -9128 when trying to use D-Verb plug-in even though my CPU should not be overloaded. Also the CPU meter is up around 90% but I am not using many plug-ins. |
There is currently a problem affecting D-Verb especially when using certain Algorithm settings. Room 2 suffers from this problem, although other algorithms could be affected as well. This problem is more common on Pentium 4 processors.
Workarounds:
1) Use a different Algorithm (e.g. Hall).
2) Insert a plug-in (e.g. POWr Dither) before the D-Verb.
[Page View]
|
|
|
Loud random noise bursts can occur during playback and record in Pro Tools ...
|
| Loud random noise bursts can occur during playback and record in Pro Tools LE 6.0 with Waves 4.0 RTAS Plug-Ins. |
This has been seen with the Waves 4.0 Rvox plug-in, possibly others.
Go to www.waves.com and hit "Downloads". Under the "Quick links" section hit "Updates" and download "Wave-Shell DAE 4.0.1 x".
2. Go to: HD>Library>Application support>Digidesign>Plug-ins – trash the current Wave-Shell 4.0_x and replace it with the new one (Wave-Shell DAE 4.0.1 x).
WaveShell-DAE 4.0.1_X fixes problems, such as loud noise bursts, occurring when issuing Play/Stop commands. If you are using Pro-Tools TDM/LE 6.0 or higher, it is highly recommended to use this WaveShell.
Installation: Go to Digidedign’s Plug-Ins folder (Your Hard Disk / Library/ Application Support/Digidesign/Plug-Ins), trash WaveShell DAE 4.0_X and replace it with WaveShell-DAE 4.0.1_X.
[Page View]
|
|
|
When using Quickpunch in a 96k session, "DAE is low on memory error ...
|
| When using Quickpunch in a 96k session, "DAE is low on memory error -9006" and DAE error 8 messages can occur. |
This is a known issue in Pro Tools 6.1.
[Page View]
|
|
|
DAE error -6031 can occur when using RTAS Plug-Ins with SYNC I/O as clock ...
|
| DAE error -6031 can occur when using RTAS Plug-Ins with SYNC I/O as clock master. |
This is a known issue in Pro Tools 6.1, and is fixed in 6.4.
As a workaround a new DAE was developed to overcome this problem. Install DAE v.6.1cs1 (available on the 6.1 CD in the Additional Files/Beta Software folder, or as a download from http://www.digidesign.com/download/daedsi/).
[Page View]
|
|
|
I get an error "No peripheral found for the deck." when launching Pro ...
|
| I get an error "No peripheral found for the deck." when launching Pro Tools |
This error can be caused when installing over a previously installed version of Pro Tools that used different Digidesign hardware (e.g. installing Pro Tools LE for Mbox over a previously installed version of Pro Tools for 001).
If you have both installation CD's for each type of hardware, run the uninstaller from those CD's, then restart your computer and do a reinstall of the proper version.
To uninstall from the CD, put the CD in your drive and double-click on the 'Install Pro Tools (LE)' icon from the CD.
Continue thru the license agreement and, when you get to the page that says 'Custom Install', click on 'Custom Install' and, from the drop down menu, select 'Uninstall', then click on the 'Uninstall' button in the lower right.
If you do not have both installation CD's, you can run the uninstaller from the CD you DO have, but you will also need to remove some components by hand, either by logging in as Root or by booting into OS9 (if your computer is capable of this) and removing the following:
>System>Library>CFMSupport - remove DAE, Digidesign DSP Manager, DigiDirectIO, DigiHardwareSetup, DigiHwGUI, DigiStreamManager and DigiSystemInterface
Then trash the DAE Prefs folder, Digisetup, and Pro Tools LE preferences in >Users>Current User>Library>Preferences
You should then be able to reinstall the proper version for your hardware.
[Page View]
|
|
|
In Pro Tools LE v 6.1 running on Windows XP, Amplitube, SampleTank and ...
|
| In Pro Tools LE v 6.1 running on Windows XP, Amplitube, SampleTank and Autotune don't appear in my plug-in list. I'm using the last version available. |
Plug-ins are now installed in the Program Files\Common Files\Digidesign\DAE\Plug-ins
Some third party installers need to be updated.
So try to choose this destination folder during plug-in installation
or check that required components are in this location...
Amplitube.dpm
Amplitube.dpm.rsr
Amplitube.ike
Amplitube.xrs
Amplitube settings (folder)
Amplitube preferences
Sampletank.dpm
Sampletank.dpm.rsr
Sampletank.ike
Sampletank settings
Auto-Tune RTAS PC V3.dpm.rsr
Auto-Tune RTAS PC V3.dpm
...
[Page View]
|
|
|
DAE error -4 while the DSI is loading on OS X.
|
| DAE error -4 while the DSI is loading on OS X. |
In many cases this is narrowed down to bad hardware. Suspect the HD Process or HD Core card. Also check the flex cable.
[Page View]
|
|
|
DAE error -1113 when launching Pro tools 6.1 on OS X, followed by the ...
|
| DAE error -1113 when launching Pro tools 6.1 on OS X, followed by the message "your hardware is either not installed or in use by another program" |
the MOTU firewire audio console v1.2 is known to cause this error. As a workaround, do not launch this software before launching Pro Tools.
[Page View]
|
|
|
On a Windows PC, when launching Pro Tools, the Pro Tools application will ...
|
| On a Windows PC, when launching Pro Tools, the Pro Tools application will disappear during launch of MIDI or DAE and reverts back to the desktop. |
Important: Read Abase # 27900 for more information, the solution there may solve this problem.
Do you have a Yamaha Motif keyboard? This problem can occur after installing the Yamaha software editor application, Motif Tools application or Tyros software. It is not clear if these application(s) must be installed to use the USB capabilities of Yamaha Motif, but it seems likely. Apparently, this software is preventing Pro Tools from launching and uninstalling it doesn't help Pro Tools to finish its launch.
Unfortunately, There is no solution to the problem at this time. Uninstalling the Yamaha software editor application or Motif Tools from the Add or Remove Program Control Panel does not fix this issue. Consequently, there must be elements of the Yamaha software that are left behind and aren't being removed when using the Add or Remove Program Control Panel.
Digidesign Tech Support can only recommend that the Pro Tools user call Yamaha and find out how to completely remove the software editor application. Otherwise, the only other choice is to backup the system hard drive and reinitialize (f-disk) and then reinstall Windows, Pro Tools, etc. Do not install the Yamaha software editor application again. Unfortunately, the Yamaha Motif might not be usable as a USB device and must be connected to a MIDI interface with MIDI cables instead.
Other scenarios similar to this situation are:
Pro Tools will not launch unless the Yamaha Motif keyboard is connected to the computer.
[Page View]
|
|
|
