 "Unable to create a DAE deck" when launching Pro Tools LE 5.0.
|
| "Unable to create a DAE deck" when launching Pro Tools LE 5.0. |
Verify there is an audio card installed. Previous users of DAE PowerMix are prone to encounter this error. Pro Tools LE requires either an AMIII or 001 installed in order to launch.
[Page View]
|
|
|
Tokyo Plug-in doesn't show up in the Pro Tools inserts window even though ...
|
| Tokyo Plug-in doesn't show up in the Pro Tools inserts window even though it is seen in the DAE Plug-ins folder. |
-Tokyo plug-in only works with TDM systems.
-Tokyo only shows up on a stereo aux track or stereo master fader, it won't be seen on a mono track.
-the Digidesign_Stream Manager extension must be installed in the extensions folder.
Studio9000 version 2.5
[Page View]
|
|
|
DAE error -9088 when launching Pro Tools on a PowerMac with Digidesign ...
|
| DAE error -9088 when launching Pro Tools on a PowerMac with Digidesign hardware. |
The literal definition for this error is: "Missing allowed decks for the Hardware setup dialog."
- Cards not seated properly.
- Cards in a Chassis that is not powered on or connected.
- Hardware not supported.
- Hardware failure.
[Page View]
|
|
|
"Unable to create a DAE deck" when launching Pro Tools LE 5.0.
|
| "Unable to create a DAE deck" when launching Pro Tools LE 5.0. |
This can happen if an older version of DAE and/or DSI is on the system prior to installing Pro Tools 5.0 LE.
In one case, the user had installed Sound Edit 16 which installed an older version of DSI (2.9.6) and after installing PT 5.0 LE it was not moved to the obsolete Digidesign folder. Disabling the old DSI fixed this problem.
Many applications that can use Digi hardware install a DSI in the system and should be the first thing checked when trouble shooting this error. Also, check hardware connections and card seating as possible other causes.
In most cases, the DAE playback buffer setting will reset itself to (0) which could be an indication of a problem.
[Page View]
|
|
|
Waves 2.8.1 Released for Pro Tools TDM Systems
|
| Waves 2.8.1 Released for Pro Tools TDM Systems |
December, 12 1999
Digidesign and Waves are pleased to announce that all compatibility issues between Digidesign and Waves products will be addressed by using the newly released Waves Waveshell 2.8.1 and Pro Tools 5.0
If there is a need to run Pro Tools 4.3.x please continue to use DAE version 3.4.2 f9 and the new KS Waves Waveshell version 2.8.1 and the 2.8.1 plug-ins. This will address DSP memory management problems that users of Pro Tools|24 MIX and Waves TDM Plug-Ins had been experiencing. Specifically, this will address the DAE memory overflow that may occur, typically in larger Pro Tools Sessions in which many Plug-Ins are instantiated, when a session is closed and reopened and DSP memory shuffling is performed. Please refer to the Waves 2.8.1 Release Notes for more information.
"The partnership between Digidesign and Waves is essential, since the Waveshell and Waves TDM Plug-Ins are a Development Partner solution of choice for so many Pro Tools Users," says Ed Gray, Manager of Digidesign's Developer Program. "It's gratifying to see Digidesign and Waves work to diagnose what proved to be a complex technical issue, and to quickly solicit testing and feedback from our mutual users."
Orly Nesher, Director of Sales & Marketing at Waves added, "We look forward to cooperating with Digidesign as our two high-end product lines continue to evolve and improve."
Waveshell 2.8.1 and their TDM updaters are available at www.waves.com
Note: When changing DAE/Waves versions, always trash the DAE Prefs folder (System Folder/Preferences) and the WaveShell-DAE Preferences file. (System Folder/Preferences/Waves Preferences)
DAE version 3.4.2 f9: http://www.digidesign.com/download/daedsi.html
Waves 2.8.1 Release Notes: http://www.digidesign.com/support/readme/waves2.8.1readme.html
[Page View]
|
|
|
DAE error -7222 when launching or quitting Pro Tools.
|
| DAE error -7222 when launching or quitting Pro Tools. |
- Run Plug-In updater from the Pro Tools CD ROM.
- Check TDM ribbon cable, reseat it or try different nodes.
- Allocate more RAM to DAE
-Trash DigiSetup, DAE and PT prefs
-verify version of DSP manager matches release for the version of PT
-Trash waves prefs
-Verify latest version of Waveshell and matching DAE e.g. 3.4.2f9 or 5.0 or later.
-Check Pro Tools and DAE RAM allocations
-Check Disk cache memory
-Reseat TDM cable
-Reseat I/O cable
[Page View]
|
|
|
"Sadly this Plug-In is only compatible with AMII and 24|Project systems" ...
|
| "Sadly this Plug-In is only compatible with AMII and 24|Project systems" then PT quits when launching Pro Tools LE for Digi 001. |
Installation occurred on top of a prior installation of Pro Tools for AMII or 24 systems. Thus the installer left the original Plug-Ins in the DAE Folder from that installation.
Trash the DAE Folder then reinstall Pro Tools LE.
[Page View]
|
|
|
DAE error -6046
|
| DAE error -6046 |
This error will occur when hot swapping an audio interface with ProTools launched.
Might need to trash prefs.
this happened with Pro Tools 5.0 with an 888
[Page View]
|
|
|
What does DIGIMIDI.dll do and where does it reside
|
| What does DIGIMIDI.dll do and where does it reside |
DigiMIDI.dll handles the kinds of things that OMS takes care of on the Macintosh. It should be installed along with Pro Tools in the appropriate place, which would be in the same directory as other Digi DLLs like DAE.dll.
[Page View]
|
|
|
"Unable to create a DAE deck" while launching Pro Tools LE 5.0.
|
| "Unable to create a DAE deck" while launching Pro Tools LE 5.0. |
- Verify that the Digi 001 card is firmly seated in the PCI slot (it can easily pop out when snapping on the I/O connector cable if the user has not screwed in the card).
- Verify that the I/O cable is seated at both the card and Interface.
The red ADAT optical OUTPUT light (ADAT light pipe) gets its power from the PCI slot. If the card is not firmly seated, it will NOT be lit.
Running DigiTest verified that the card was not present. DigiTest did not see any card in the PCI slot but did see a SCII card (that was seated correctly). Also , as a quick check, if the card is seated correctly, the little red ADAT optical OUTPUT light will be lit.
[Page View]
|
|
|
