 Waves 2.8.1 Released for Pro Tools TDM Systems
|
| Waves 2.8.1 Released for Pro Tools TDM Systems |
December, 12 1999
Digidesign and Waves are pleased to announce that all compatibility issues between Digidesign and Waves products will be addressed by using the newly released Waves Waveshell 2.8.1 and Pro Tools 5.0
If there is a need to run Pro Tools 4.3.x please continue to use DAE version 3.4.2 f9 and the new KS Waves Waveshell version 2.8.1 and the 2.8.1 plug-ins. This will address DSP memory management problems that users of Pro Tools|24 MIX and Waves TDM Plug-Ins had been experiencing. Specifically, this will address the DAE memory overflow that may occur, typically in larger Pro Tools Sessions in which many Plug-Ins are instantiated, when a session is closed and reopened and DSP memory shuffling is performed. Please refer to the Waves 2.8.1 Release Notes for more information.
"The partnership between Digidesign and Waves is essential, since the Waveshell and Waves TDM Plug-Ins are a Development Partner solution of choice for so many Pro Tools Users," says Ed Gray, Manager of Digidesign's Developer Program. "It's gratifying to see Digidesign and Waves work to diagnose what proved to be a complex technical issue, and to quickly solicit testing and feedback from our mutual users."
Orly Nesher, Director of Sales & Marketing at Waves added, "We look forward to cooperating with Digidesign as our two high-end product lines continue to evolve and improve."
Waveshell 2.8.1 and their TDM updaters are available at www.waves.com
Note: When changing DAE/Waves versions, always trash the DAE Prefs folder (System Folder/Preferences) and the WaveShell-DAE Preferences file. (System Folder/Preferences/Waves Preferences)
DAE version 3.4.2 f9: http://www.digidesign.com/download/daedsi.html
Waves 2.8.1 Release Notes: http://www.digidesign.com/support/readme/waves2.8.1readme.html
[Page View]
|
|
|
How do I set up the MIDI Metronome for a "click track" in Pro Tools and ...
|
| How do I set up the MIDI Metronome for a "click track" in Pro Tools and Pro Tools LE with SampleCell or an external device? |
1) Enable OMS (extension)
2) Create an OMS Studio Setup (verify synth modules are connected , i.e. Sample Plug-In is installed)
3) Double Click on Metronome Icon on Transport Control
4) Select SampleCell or any other Synth Module
5) Choose a Channel and instrument e.g., in GM mode, select D#1(side Stick) for accented notes [GM drum mapping]
[Page View]
|
|
|
Pro Tools LE (5.x) could not be opened because Pro Tools couldn´t be found. ...
|
| Pro Tools LE (5.x) could not be opened because Pro Tools couldn´t be found. |
This message is typically seen on systems without enough RAM (e.g. 64 MB). With 128 MB the system works fine and Pro Tools LE launches.
[Page View]
|
|
|
"Pro Tools could not be launched because the application could not be ...
|
| "Pro Tools could not be launched because the application could not be found" when launching Pro Tools LE 5.0 on a G3/G4. |
Not enough RAM installed in the computer.
128 MB minimum required, 192 MB recommended.
[Page View]
|
|
|
DAE error -7222 when launching or quitting Pro Tools.
|
| DAE error -7222 when launching or quitting Pro Tools. |
- Run Plug-In updater from the Pro Tools CD ROM.
- Check TDM ribbon cable, reseat it or try different nodes.
- Allocate more RAM to DAE
-Trash DigiSetup, DAE and PT prefs
-verify version of DSP manager matches release for the version of PT
-Trash waves prefs
-Verify latest version of Waveshell and matching DAE e.g. 3.4.2f9 or 5.0 or later.
-Check Pro Tools and DAE RAM allocations
-Check Disk cache memory
-Reseat TDM cable
-Reseat I/O cable
[Page View]
|
|
|
I can enter in 9 digits of resolution after the decimal point into the ...
|
| I can enter in 9 digits of resolution after the decimal point into the tempo dialog, but it only displays 2 digits past the decimal point. Is it reading the digits I entered in past the 2nd post-decimal place? |
Yes it is reading the extra digits past the 2nd post decimal place but it isn't displaying them.
Though Pro Tools 5.0 can have a tempo resolution of up to 9 decimals, there is a current limitation that it can only display 2.
Be careful not to double-click on the tempo display after entering in a more-than-2-decimal tempo. If you ok the dialog the tempo will be changed to the 2 decimal place tempo that was displayed.
[Page View]
|
|
|
"The bar|beat marker could not be created because it is too close ot too ...
|
| "The bar|beat marker could not be created because it is too close ot too far away from the nearest bar|beat marker to support a valid tempo" when using Identify Beat command. |
Invalid tempo request. Valid tempos are from 30 to 300 bpm in Pro Tools 5.0.
When using Identify Beat to select a beat marker, entering an End value that is too close to the Start value can cause this error because it will ask PT to slow tempo down below 30bpm. Also entering in an End value too far away from the Start value will cause this error, requesting PT to speed tempo up beyond 300 bpm.
It is possible to create tempo of less than 30 bpm in Pro Tools by dragging the latter Bar Beat Marker to the right. After doing this, you cannot instantiate another Bar Beat Marker.
[Page View]
|
|
|
DAE error -44 encountered while performing fade operation when opening ...
|
| DAE error -44 encountered while performing fade operation when opening a session. |
This error could indicate that the user has launched Pro Tools from a CD ROM (possibly by double clicking on a session document).
Eject the Pro Tools LE CD-ROM installer from the computer and try again.
[Page View]
|
|
|
I pulled up a MIDI channel and it's not changing programs on my synth ...
|
| I pulled up a MIDI channel and it's not changing programs on my synth when I select program names in Pro Tools 5.0. |
MIDI input device is not selected.
Select MIDI input device from Midi -> input device.
[Page View]
|
|
|
"Sadly this Plug-In is only compatible with AMII and 24|Project systems" ...
|
| "Sadly this Plug-In is only compatible with AMII and 24|Project systems" then PT quits when launching Pro Tools LE for Digi 001. |
Installation occurred on top of a prior installation of Pro Tools for AMII or 24 systems. Thus the installer left the original Plug-Ins in the DAE Folder from that installation.
Trash the DAE Folder then reinstall Pro Tools LE.
[Page View]
|
|
|
