What controller personality profile does the Yamaha Motiff 8 use for transport ...

What controller personality profile does the Yamaha Motiff 8 use for transport control within Pro Tools' peripherals, MIDI controllers option? The Motiff 8 uses the CS-10, a legacy controller. For those using Pro Tools v6.4 or higher it may be necessary to download these legacy controller from our website. www.digidesign.com/download/controllers Once the controller file is downloaded, you must manually install into the following locations: Mac OS X: Mac HD > Applications > Digidesign > Pro Tools > Controllers. Windows XP: My Computer > Local Disc (C:) > Program Files > Common Files > DAE > Controllers. [Page View]

Up arrow moves the cursor to start of session or to another place in the ...

Up arrow moves the cursor to start of session or to another place in the timeline. It is likely that "Link Edit and Timeline Selection" is disabled. The cursor is then being moved to the last cursor position before unlinking the Timeline and Edit Selection. To enable Link Edit and Timeline Selection: Operations menu > Select Link Edit and Timeline Selection. [Page View]

Digi 002 Rack firmware update fails repeatedly on G5 Dual 2.7 running ...

Digi 002 Rack firmware update fails repeatedly on G5 Dual 2.7 running Mac OS 10.4. On one occasion, connecting Digi 002 Rack to the G5's front Firewire port allowed the customer to complete firmware download. The 002 Rack was originally connected to Firewire port on rear panel of G5/2.7 DP. [Page View]

DAE error -9073 with Mac OS X 10.4.2 using internal ATA drives.

DAE error -9073 with Mac OS X 10.4.2 using internal ATA drives. Spotlight indexing can cause -9073 errors when it's updating it's indexes while recording or playing back a session. Performance in general will improve as well. To turn this off there are two methods, both require administrator permissions: Manually: 1) Start up the Terminal (/Applications/Utilities) 2) Type "cd /etc" and press Enter 3) Type "sudo pico hostconfig" and enter your password or press Enter - An editor will open with the following entry: SPOTLIGHT=-YES- 4) Replace 'YES' with 'NO' 5) press ctrl-x, then 'Y' and then press Enter 6) Close the Terminal and restart the computer Use Spotless: Download Spotless 2) Start up Spotless 3) Wait 15 seconds and press 'not yet' Indexing can now be turned off for each drive individually or you can press the 'Disable Spotlight Indexing' under 'Master Indexing Control' It's possibly best to disable indexing for each separate drive as well. 4) Restart the computer When the computer restarted you will notice the Spotlight icon at the top right of your screen turned into a red sign with a white cross. Note: Only indexing will be disabled, you will still be able to search with Spotlight. [Page View]

Moving a session from Digi 001 Pro Tools LE v5.0 to Pro Tools HD v6.2.3 ...

Moving a session from Digi 001 Pro Tools LE v5.0 to Pro Tools HD v6.2.3 and opening the session results in a -199 error. The session was being copied to an Acom data FireWire drive. In one instance, the FireWire drive was corrupting the Pro Tools session. Note: Acom FireWire drives are not supported to use with Pro Tools as a playback drive because it does not have the Oxford 911 (FW 400) or 912 (FW 800) bridgechip, which is required for using FireWire drives. [Page View]

I have a QuickTime movie that I imported into Pro tools LE v6.9.2. Whenever ...

I have a QuickTime movie that I imported into Pro tools LE v6.9.2. Whenever I place the Selector Tool on the center of the Movie in the QuickTime Movie view, the Movie Window disappears. In one customer's case the QuickTime movie was created with a proprietary Codec ( Deck Link Extreme). By recreating as a Quick Time DV Movie and importing the new QuickTime Movie. The Movie window performs as normal. [Page View]

DAE Errors 9092, 9093, or 9094, 9129 on Windows XP systems with dual core ...

DAE Errors 9092, 9093, or 9094, 9129 on Windows XP systems with dual core processors. These errors can be caused by problems with processor scheduling in dual core processors. The solution is to assign Pro Tools to run on a specific processor core. To do this: 1. Launch Pro Tools, but do not create or open a session. 2. Right click on the Task Bar and select 'Task Manager'. 3. Click on the Processes tab, then right-click on ProToolsLE.exe and select 'Set Affinity' from the drop down menu. 4. Uncheck the box for CPU 0. 5. Click OK and close the Task Manager. You will have to do this each time you launch Pro Tools unless you use and application like THG Task Assignment Tool. More info on the THG Task Assignment Tool can be found here: http://www6.tomshardware.com/cpu/20040528/index.html [Page View]

Can an older revision of Mojo (without the clock output) be used with ...

Can an older revision of Mojo (without the clock output) be used with Pro Tools and Media Station|PT? Pro Tools is officially qualified with newer revision Mojo's only (those with clock outputs). To determine if your Mojo has a clock output, look at the left audio output and see if it also says, "Clk." Avid Pro Tools LE requires that the clock output from Mojo be connected to the S/PDIF input of the Digi 002, and that clock reference in Pro Tools is set to S/PDIF. This is necessary so that the Digi 002 can lock to the same video reference signal that the Mojo is locked to. Pro Tools TDM 6.6 and higher may launch and function properly with an older revision Mojo, however Media Station|PT 1.6.1 will not launch when an older Mojo is connected. [Page View]

Control surfaces do not work properly under Pro Tools M-Powered 6.8 on ...

Control surfaces do not work properly under Pro Tools M-Powered 6.8 on localized versions of Windows. It turns out that the CPR fix in Pro Tools LE v6.7 for the MIDI output issues on European installs of XP was never put into Pro Tools M-Powered v6.8. Not fixed yet. [Page View]

Pro Tools LE cannot do more than 3 successful synchronization lockups ...

Pro Tools LE cannot do more than 3 successful synchronization lockups in playback or record. On the 4th attempt the transport lights start flashing until you stop incoming MIDI time code. This is a known issue in Pro Tools LE 6.9.2. and In 6.9. It has been fixed in 6.9.2cs4 and 6.9cs4. Here's where to download: http://www.digidesign.com/download/cs/ [Page View]

Prev	Support Search Search	Next