Pro Tools M-Powered 7.4cs9 Update for Mac OS X (Tiger)

• Universal installer for PowerPC and Intel-based Macs on Mac OS X 10.4 ("Tiger")
  
• Not supported on Mac OS X 10.5 ("Leopard")
  
• This update requires previous installation of Pro Tools M-Powered 7.4
  

Who Should Use This Update?

• Session/File Management
  
• Editing
  
• QuickTime Video
  

• Reason Adapted
  
• DigiBase
  
• Fade files
  
• Automation
  
• File Comments in WAV files
  
• MIDI
  
• ProFire 2626 I/O Setup
  
• Automation
  
• Plug-ins
  
• User Interface
  
• Dynamics III
  
• Using Soundminer
  
• Elastic Time
  
• Control Surfaces
  

• In addition to the fixes above for M-Powered 7.4 users with all M-Audio interfaces supported with M-Powered 7.4, Pro Tools M-Powered 7.4cs3 or higher is required for M-Powered support of the M-Audio Fast Track® Ultra, Fast Track Ultra 8R, and ProFire™ 2626.
  

What’s Included in Pro Tools M-Powered 7.4cs9 for Mac OS X?

• Saving a session copy with sample rate conversion to a rate different from the session's may result in erroneous automation ramps between breakpoints. This is mostly evident in scenarios where a static automation level had been changed over the duration of a single region.
  

• If you selected several adjacent regions, clicking on one of them to move all selected regions will only move the region you clicked on.
  

• Multi-track QuickTime movies import into Pro Tools 7.4 with each audio track containing a mix of all tracks, rather than individual tracks.
  

• Only occurs in Reason Adapted, and does not occur when Reason Adapted is operated without Pro Tools
  

• The assertion errors would occur when attempting to subsequently save the session
  
• Previous workaround was to use File > Import > Audio instead of drag and drop from the Workspace
  

• This could occur when trying to trim the breakpoints down a few dB.
  

• Although the file comments are invisible in the DigiBase comments field, clicking in that field will delete all of the comments
  
• This only affects non-BWF WAV files
  
• This CS version restores the visibility of WAV file comments, as long as the field wasn't clicked in using earlier versions of Pro Tools 7.4
  

• Window cannot be resized, scroll bar doesn't access other MIDI inputs
  

• Note: If the I/O Setup does not show all Analog, Optical, and S/PDIF input labels after updating to 7.4cs9, launch the ProFire 2626 Setup Application via Hardware Setup to refresh the I/O Setup.
  

• The thinning algorithm could mistakenly classify a breakpoint as redundant
  

• Celemony Melodyne and AudioEase Snapper would cause a crash with tick-based regions (introduced in Pro Tools 7.4)
  

• Functionality is now the same as in Pro Tools 7.3.x
  

• This problem was intermittent
  

• File names using an ellipsis (...) would cause the error, "Unable to create a new audio file on drive "xxx" for track "xxx" because I/O error (-36)."
  

• Transients could be placed either before or after grid lines
  

• Clicking on any Event marker will now raise its internal confidence rating to 100%, thus preventing the marker from being removed when the Event Sensitivity setting is lowered within the Elastic Properties window
  

• This would usually occur when using extreme amounts of stretching
  

• Quantizing a selected area could cause markers outside that selection to move
  

• If a plug-in window was closed from a control surface while the plug-in window was being dragged across the screen, Pro Tools would quit unexpectedly.
  

Installation Instructions

1. Verify Pro Tools M-Powered 7.4 is installed on your system.
2. Quit the Pro Tools application if it is open.
3. Locate the Pro Tools M-Powered 7.4cs9 update installer and launch it.
4. Follow the onscreen instructions.
5. When installation is complete, restart your computer.

• Pro Tools M-Powered.app (v7.4cs9)
  
• FFmt.framework (v7.4cs9)
  
• DAE.framework (v7.4cs8)
  
• DigiReWire.dpm (v7.4cs8)
  
• DHS.framework (v7.4cs3)
  
• Dynamics III.dpm (v7.4cs2)