Pro Tools M-Powered 8.0cs2 Update for Mac

• This update requires previous installation of Pro Tools M-Powered 8.0 software
  
• Universal installer for PowerPC and Intel-based Macs
  

Who Should Use Pro Tools M-Powered 8.0cs2?

• Editing
  
• Plug-in automation
  
• Session file management
  
• Graphical User Interface (GUI)
  

• File import
  
• File management
  
• Mixing
  

What's Included in Pro Tools M-Powered 8.0cs2 for Mac OS X?

• After changing the session start time and maintaining time code, Pro Tools will delete additional playlists and crash with a kernel panic after saving and closing the session. You may see any of the following errors prior to the crash: "Could not complete the close session command because basic_string::_S_create" or "Bus error" in thread "Main Thread", at address 0x0."
  

• Moving (dragging) an automated plug-in from inserts F-J to inserts A-E while the automation lane for one of the plug-in's parameters is visible may crash Pro Tools.
  

• Writing automation to one plug-in located on inserts F-J will cause the same automation data to be written to all other plug-ins located on insert F-J on the same track. Previously existing automation will be overwritten (or erased if the "Plug-In Controls Default to Auto-Enabled" preference is checked) after saving, closing and reopening the session.
  

• In certain cases sessions will not open due to the following error: "Could not complete the Open Session command because magic ID does not match while translating Session Window Config." This error is more likely to occur in tandem with very large track counts (~100) and long (>1 hour) recordings.
  

• Certain third party plug-ins such as Addictive Drums or UVI Workstation will not function correctly under Pro Tools 8. Mouse clicks are vertically offset and parts of the plug-in GUI will not draw correctly.
  

• Saving a session copy with sample rate conversion to a rate different from the session's may result in erroneous automation ramps between breakpoints. This is mostly evident in scenarios where a static automation level had been changed over the duration of a single region.
  

• Removing a file from the Pro Tools region list or project browser may crash Pro Tools if another audio file with the same name is already used by Transfuser.
  

• Changing the channel width by inserting a mono-to-stereo plug-in to a mono track will remove a downstream mono plug-in (and all its automation data) that resides on underlying insert slots without warning.
  

Installation Instructions

1. Verify Pro Tools M-Powered 8.0 is installed on your system.
2. Quit the Pro Tools application if it is open.
3. Locate the Pro Tools M-Powered 8.0cs2 update installer and launch it.
4. Follow the onscreen instructions to install Pro Tools M-Powered 8.0cs2.
5. When installation is complete, restart your computer.

• Pro Tools M-Powered.app (v8.0.0cs2)
  
• Cfnd.framework (v8.0.0cs2)
  
• DAE.framework (v8.0.0cs2)
  
• DFW.framework (v8.0.0cs2)
  
• DHS.framework (v8.0.0cs2)
  
• DUI.framework (v8.0.0cs2)