96i I/O

$ 2,195.00
Find A Dealer
       
Overview Features Specifications Download
   

96i enables you to readily introduce output from third-party outboard gear — keyboards, samplers, effects, and other line-level equipment — into your Pro Tools environment. Its 16 analog inputs provide balanced or unbalanced A/D conversion using tip-ring-sleeve (TRS) 1/4" connectors. A S/PDIF port capable of 24-bit digital I/O allows you to connect professional DAT recorders, CD players, and other digital recording devices. A/D and D/A converters of the same quality as those of the Digidesign 96 I/O ensure that your signal’s fidelity is maintained going into and coming out of Pro Tools.





Features
  • High-quality, 2U I/O device for instruments and effects gear
  • 24-bit balanced TRS connections: 16 analog inputs, 2 analog outputs
  • Two channels of 24-bit S/PDIF I/O (RCA connection)
  • Supports sample rates up to 96 kHz
  • Digidesign 96 I/O-quality converters
  • Software-adjustable level controls for inputs (six-step for inputs 1-4, two-step for inputs 5-16); outputs software-switchable between +4 dBu and –10 dBV
  • 108 dB or greater dynamic range
  • Support for balanced and unbalanced connections
  • Front-panel LEDs for input and output metering
  • Multiple units provide up to 96 discrete inputs
  • Compatible with Pro Tools|HD cards and peripherals
Dimensions
  • Width: 19 in / 48.26 cm
  • Height 3.5 in / 8.89 cm
  • Depth: 15.13 in / 38.42 cm
  • Weight: 13.81 lbs / 6.26 kg

A/D
  • Sample Rate: 44.1, 48, 88.2, 96 kHz ±10%
  • Dynamic Range: 111 dB (A-weighted), 108 dB (unweighted); see Notes 1 and 4
  • THD+N: 0.0008% / 0.0013% (-102 dB / -98 dB); +5 dBV/+17 dBu; see Note 5
  • Frequency Response: Response: +0.1 / -0.2 dB @ -2 dBu, 20 Hz – 20 kHz; see Notes 1 and 2
  • Differential Input Impedance: >25 kohms

D/A
  • Sample Rate: 44.1, 48, 88.2, 96 kHz ±10%
  • Dynamic Range: 113 dB (A-weighted), 111 dB (unweighted); see Notes 1 and 3
  • THD+N: 0.003%/0.003% (-90 dB / -90 dB); -1 dBFS @ 997 Hz; see Note 6
  • Frequency Response: +0.1 / -0.4 dB; -20 dBFS, 20 Hz – 20 kHz; see Notes 1 and 2
  • Differential Output Impedance: 50 ohms (typical)

Note 1 – Measurement made using +4 dBu input or output settings
Note 2 – Measured relative to level at 1 kHz
Note 3 – Measured with digital input at –60 dBFS @ 997 Hz
Note 4 – ADC measured with analog input level at –42 dBu @ 997 Hz
Note 5 – THD measured with input settings at -8 dBV / +4 dBu respectively
Note 6 – THD measured with output settings at -10 dBV / +4 dBu respectively

Sample Rate = 48 kHz, Noise BW = 22 Hz – 20 kHz
unless otherwise noted, Tambient = +25 C


Downloads    
96i I/O Guide v8.0 (PDF)
0.66 MB
Download
96i I/O Guide (PDF) - Japanese
0.32 MB
Download
96i I/O Datasheet (PDF)
0.07 MB
Download
96i I/O Datasheet (PDF) - Japanese
0.36 MB
Download